Home > Rack Gear > Compressors > Single Channel >

  IGS Tubecore 3U Mastering Compressor

IGS Tubecore 3U
IGS Tubecore 3U
 
Alternative Views:


List Price: $3,195.00
Our Price: $3,195.00


Availability: Usually Ships in 1 to 2 Weeks
Product Code: 9999-17048

 

IGS Tubecore 3U Mastering Compressor

IGS Tubecore 3U Mastering Vari-Mu Compressor adds density and dimension to your mix in a magical way. IGS spent hundreds of hours designing the TUBECORE to make sure that's simple to use and versatile.

IGS Tubecore 3U Mastering Vari-Mu Compressor Details

TheIGS TUBECORE 3U Mastering Vari-Mu Compressor is a fully symmetric transformer balanced stereo mastering compressor. The structure is based on the typical vari-mu solution. Apart from the classic INPUT, THRESHOLD and OUTPUT controls it introduces switchable high pass filter in the sidechain, parallel compression (MIX knob), independent ATTACK and RELEASE switches and user replaceable tubes accessible from the back of the unit.

Comfort of use

The Tubecore was designed as a studio mastering compressor. It is built using the 3U enclosure, which improves front panel clarity and makes it easier to replace tubes located at the back. The compressor allows you to work either in dual mono or mid/side mode (M/S). The Mode switch has two bypass positions ?" they both do the same, but we added the second one for your comfort and quick A/B comparing.

The tubes

The design of the Tubecore 3U is based on the possibility to replace the tubes. As a user, you can choose between a few types: 6N1P-EW ?" standard set of tubes, ??standard? IGS compression, 6BC8/6BZ8 ?" tight, transparent, punchy compression, 6386 ?" legendary compression, by famous twin triode, 5670 ?" deep and dark tube compression. The User's Manual describes in detail how to replace tubes, so it is quick and straightforward.

The quality

Every single TUBECORE 3U is hand made with high quality, matched components (1% metal film resistors, Wima caps). It is equipped with 6N1P-EW NOS tubes and individually calibrated to give you the unique and unspoiled experience of one of the best vari-mu compressors in history. It is equipped with Carnhill and Sowter audio transformers.

IGS Tubecore 3U Mastering Vari-Mu Compressor Features

  • The Tubecore 3U adds density and dimension to your mix in a magical way
  • IGS spent hundreds of hours designing the TUBECORE to make sure that's simple to use and versatile
  • The user decides how the device should sound
  • Tubecore 3U uses 24 step Elma switches(!!!)

IGS Tubecore 3U Mastering Vari-Mu Compressor Specifications

  • Device type
    • Vari Mu Compressor Yes
  • Basic features
    • All stepped manipulators 24 pole Elma switches
    • Sidechain HPF 120Hz, 60Hz, Off
    • WET/DRY Mixer 0 - 100%, 4 dB step
    • MID/SIDE Processing OpAmp M-S encode/decode
  • Input & Output
    • Input Impedance (balanced) XLR, 2500 Ohm, Carnhill balanced
    • Output Impedance (balanced) XLR, 600 Ohm, Sowter balanced
  • Levels
    • Operating Level +4dBu
    • Max input level +22 dBu
    • Max output level +22 dBu
    • Dynamic Range >107 dBA (@ 1kHz, +24 dBu)
    • Max. gain +35dB
    • Max Gain Reduction 20 dB
  • Time constants
    • Attack: 10 - 30 ms
    • Release: 0.1s - 4s
  • Bandwidth
    • Fequency response 20Hz to 20kHz; +/- 0.2dB
    • Distortion (@ 20 Hz - 20 kHz)
    • Signal to Noise Ratio 87 dBA
    • THD 0.12 %
    • THD+N 0.15 %
    • IMD (SMPTE) 0.32%
    • Crosstalk 82 dB
  • Power
    • Voltage 115/230V AC, 50-60Hz
    • Power consumption 44 Wats
    • Power supply External
  • Packing box
    • Dimensions 70x50x30 cm
    • Shipping weight 9kg
  • Others
    • Tube set 6N1P-EW, 6BC8, 5670, 6386

IGS Tubecore 3U Mastering Vari-Mu Compressor Downloads

Click here to view all IGS products