Home > Rack Gear > 500-Series > 500-Series Modules >

  IGS Alter 500-Series Compressor

IGS Alter
IGS Alter
 
Alternative Views:


List Price: $775.00
Our Price: $775.00


Availability: Usually Ships in 1 to 2 Weeks
Product Code: 9999-15872

 

IGS Alter 500-Series Compressor

IGS Alter 500-Series Compressor is an 1176-style FET compressor built for the 500 series, delivering the sound and performance of the classic FET compressor in a small footprint. Till this day no better vocal compressor has been designed!

The ALTER 500 is a FET compressor built is the 500 standard. The FET-type solution was used for the first its application in the legendary UREI 1176 compressor from the 70s.

The ALTER is a single-channel unit with stepped input and output controls. The Ratio switch has six positions, including two additional to the original 1176 1:1 and 2:1 settings. Slam Mode can be turned on with a separate switch, working regardless of the Ratio settings. Attack and release times can be set to Fast / Mid / Slow with 3-pole switches. The compressor is equipped with a relay bypass, achieved on the front panel. The input is balanced with a modern, low-noise op amp and the output with a Carnhill transformer. The circuit has two amp stages, between which is the output control. The stage amps are based on the discreet API2520 circuit. The level of gain reduction is shown by a 20 point led bar.

IGS Alter 500-Series Compressor Features

  • Input - Input level and compression depth
  • Output - Output Level
  • Attack - Variable Attack - 3 ranges: 0.02, 0.2 and 0.8 ms.
  • Release - Amp recovery time to the value of 0.85 max. Range: 50ms, 600ms, 1.1 sec.
  • Ratio - compression ratio over the threshold response.
  • Ratio ranges: from 1:1 (line amp), through 4:1 (compressor) to 20:1 (limiter)
  • SLAM - allows the enabling of All-Buttons-On - the "secret weapon" of any studio engineers ;)
  • COMP IN / OUT - Enable Bypass relay device
  • GR - very fast LED indicator showing the compression level in the range from 0 to 20dB.

IGS Alter 500-Series Compressor Specifications

  • Device type
    • FET Compressor: Yes
  • Basic features
    • All stepped manipulators: Yes
  • Input & Output
    • Input Impedance (balanced): 10k ohm
    • Output Impedance (balanced): 600 ohm
    • Audio transformers: Yes, Carnhill
  • Levels
    • Operating Level: +4 dBu
    • Max input level: +20 dBu
    • Max output level: +22 dBu
    • Noise Level: -99 dBA
    • Max. gain: 36 dB
    • Max Gain Reduction: 20 dB
  • Time constants
    • Attack: 20us, 400us, 800us
    • Ratio: 1:1 to 20:1
    • Release: 50ms, 600ms, 1.1s
  • Bandwidth
    • Fequency response: 8 Hz to 20 kHz, +/- 0.1dB
  • Distortion (@ 20 Hz - 20 kHz)
    • THD+N: 0.012%
  • Power
    • Power consumption: 2.5W
  • Packing box
    • Shipping weight: 1 kg / 2.2 lbs

IGS Alter 500-Series Compressor Includes

  • Alter 500
  • Manual
  • Warranty

IGS Alter 500-Series Compressor Downloads

Click here to view all IGS products