| Grace Design Lunatec V3 2-Channel Portable Preamp Details
As
music doesn’t always occur in a controlled studio environment, the
need for high quality portable audio recording gear remains strong. So
for those dedicated to capturing music and sound that happens outside
the recording studio, we offer the Lunatec V3 portable DC powered 2 channel
mic preamplifier with AD converter.
The Lunatec V3 is built to deliver the same transparent, high fidelity
audio performance as the rest of our line, while being portable enough
to fit in a shoulder bag and accompany you and a portable recorder anywhere
you need to go.
Sound
designers, concert tapers, remote engineers, classical engineers or anyone
with a portable recording system will simply be thrilled by the depth,
clarity and realism the Lunatec V3 delivers.
Our ultra-low distortion, 24/192kHz A/D converter is included as standard.
Flexible outputs include S/PDIF, TOSLINK and AES3.
Both single and dual-wire 176.4 and 192 kHz AES/EBU modes are provided
via a pair of XLR connectors, which enable connection to today’s
high sample rate dual-wire digital recording systems as well as including
the provision for single-wire systems that will likely become the standard
in the future.
The
Lunatec V3 is also equipped with our unique new analog noise shaping dither
circuit, or ANSRTM, which can be applied for ultra-high quality word length
reduction when sending signals to a 16-bit digital recorder.
With
measured and sonic performance that rivals even the finest microphone
preamplifiers, the Lunatec V3 effortlessly translates the most subtle,
complex low-level ambient information or highly dynamic material without
noise or coloration. What your microphones hear is what gets recorded.
Combined
with all the essential features needed for true portability, the Lunanec
V3 is hands down the best performing portable, DC powered microphone preamplifier
available. Grace Design Lunatec V3 2-Channel Portable Preamp Features
- Fully
balanced, transformerless design
- Fast,
musical transimpedance amplifier architecture
precision 11 position gold contact rotary switch gain controls
- 10dB
output trim controls for fine level adjustment
- A/D
converter with 44.1, 48, 88.2, 96, 176.4 and 192 kHz sampling rates
- ANSR(tm)
dither circuit for recording to 16-bit recorders
- 2
position high pass filters presetable at 50-100Hz or 75-150Hz with either
6 or 12 dB per octave slope
- 8-segment
dot mode LED level meters
- 48V
phantom power
- M+S
Decoding matrix
- Converter
section disable for battery power conservation
- Grace
Design audiophile performance and rugged chassis construction, packaged
to be portable and bombproof
- No
electrolytic capacitors in the signal path
- Highest
quality metal film resistors used throughout
- Five
year warranty on parts and labor
|
