Focusrite RedNet HD32R Network Interface

Focusrite

(No reviews yet) Write a Review
Product Code: 9999-17279
$2,499.99
Adding to cart… The item has been added
We Need A Few Days

This item must be ordered in from the manufacturer. Give us a few days to get it here and heading your way. Go ahead and place your order and we will let you know as soon as it ships. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Got Questions? Need Support?

888-228-4530 Contact Us!

The Focusrite RedNet HD32R Network Interface is a 1U, Pro Tools | HD interface for any Dante audio-over-IP network, providing up to 32x32 channels of I/O (16x16 at 192kHz). Featuring network and power supply redundancy, RedNet HD32R is the ideal choice for integrating your Pro Tools HD system into a Dante networked I/O environment in many critical-path applications.

The Focusrite RedNet HD32R Network Interface is perfect for Post Production, Broadcast, Live Sound or the Recording Studio applications. A pair of DigiLink mini connectors allows Focusrite RedNet HD32R to connect directly to any Pro Tools | HD system whether it's Native, HDX or even a legacy TDM system. Multiple Focusrite RedNet HD32R units can be on the same Pro Tools system up to the maximum I/O channel count of Pro Tools, and Loop Sync I/O allows seamless integration with other Pro Tools interfaces such as HD I/O and Sync HD I/O.

Focusrite RedNet HD32R Network Interface Features

  • 32x32 Pro Tools | HD I/O for Dante audio-over-IP networks at up to 96kHz (16x16 at 192kHz)
  • Primary and Expansion DigiLink mini connections
  • Up to 24-bit, 192kHz sampling rates
  • AES67 compliant
  • Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
  • Word Clock and Loop Sync I/O for increased flexibility and integration with other Pro Tools | HD hardware
  • Comprehensive remote control and remote signal metering through RedNet Control

Focusrite RedNet HD32R Network Interface Specifications

  • Digital Performance:
    • Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 Bit
    • Clock Sources: Internal, Word Clock, Loop Sync (Master or Slave) or from Dante Network Master
    • External Word Clock Range: Nominal sample rate ±7.5
    • Channel Count: 32x32 at Up to 96kHz Sampling Rate, 16x16 at 176.4 and 192kHz
  • Rear Panel Connectivity:
    • Primary Port: 1 x Mini DigiLink
    • Expansion Port: 1 x Mini DigiLink
    • Word Clock Input: 1 x BNC 75 ohm Port (Switchable Termination)
    • Word Clock Output: 1 x BNC 75 ohm Port
    • PSU: 2 x IEC Inputs with Retaining Clips
    • Network: 2 x etherCON NE8FBH-S, Also Compatible with Standard RJ45 Connectors
  • Front Panel Indicators:
    • Primary PSU (A): Green LED. Illuminates When An AC Input is Applied and All DC Outputs are Present
    • Primary PSU (B): Green LED. Illuminates When An AC Input is Applied and All DC Outputs are Present
    • Primary Network: Green LED. Indicates that a Network Connection is Present on Primary Port When in Redundant Mode
    • Secondary Network: Green LED. Indicates that a Network Connection is Present on Secondary Port When in Redundant Mode
    • Network Locked: Green LED. When Unit is Network Slave, Shows Valid Network Lock. When Unit is Network Master
    • Sample Rate: Orange LED for each: 44.1 kHz, 48 kHz, x2, x4
    • Pull Up/Down: Orange LED. Indicates Unit is Set to Operate on a Dante Pull Up/Down Domain
    • Signal Indicators: 16 Green LEDs, 8 Input/8 Output Indicators. Illuminate @ -126dBFS
    • Clock Source: Orange LED for each: Internal, Word Clock, Loop Sync and DAW Master
  • Network Modes:
    • Redundant: Allows Unit to Connect Two Independent Networks
    • Switched: Connects Both Ports to Integrated Network Switch Allowing Daisy-Chaining of Device
  • Dimensions & Weight:
    • Height: 44.5mm/ 1.75"
    • Width: 482.6mm/ 19"
    • Depth: 263mm/ 10.35"
    • Weight: 3.9kg
  • Power:
    • Power PSU: 2 x Internal, 100-240V, 50/60Hz, Consumption 30VA
  • Heat Performance:
    • Operating Temperature: Operates at Up to An Ambient Temperature of 50 Degrees Celcius

Focusrite RedNet HD32R Network Interface Includes

  • Focusrite RedNet HD32R Network Interface
  • 1 x IEC AC Mains Cable
  • 2 x IEC Mains Cable Retaining Clips
  • Safety Information Cut Sheet
  • RedNet Getting Started Guide
  • Product Registration Card, Provides Links to:
    • RedNet Control
    • RedNet PCIe Drivers (Included with RedNet Control Download)
    • Audinate Dante Controller (Installed with RedNet Control)
    • Dante Virtual Soundcard (DVS) Token and Download Instructions
  • 2 Year Warranty

No review yet, Be first to Write a Review