Focusrite RedNet A16R MKII Network Interface

Focusrite

(No reviews yet) Write a Review
Product Code: 9999-17373
$4,399.99
Adding to cart… The item has been added
We Need A Few Days

This item must be ordered in from the manufacturer. Give us a few days to get it here and heading your way. Go ahead and place your order and we will let you know as soon as it ships. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Got Questions? Need Support?

888-228-4530 Contact Us!

The Focusrite RedNet A16R MKII Network Interface is a 1U, 16x16 analogue line-level I/O interface for any Dante audio-over-IP network. Featuring network and power supply redundancy, RedNet A16R MKII is the ideal choice for providing analogue I/O in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.

The Focusrite RedNet A16R MKII Network Interface offers 16 channels of Dante-networked A-D and D-A conversion, with network and PSU redundancy. High-quality conversion with up to 119dB of dynamic range is provided through four rear-panel DB25 connectors while an additional pair of AES3 I/O is provided through male and female XLR for added flexibility. Word Clock I/O on BNC connectors allows external devices to clock to Focusrite RedNet A16R, or alternatively allows Focusrite A16R to act as a network clock grand master slaved to external input. Power is supplied through a pair of locking IEC power inlets, and network connections are provided with a pair of locking Neutrik etherCON connectors; providing redundant operation or daisy-chained operation.

Focusrite RedNet A16R MKII Network Interface Features

  • 16 Channels of high-quality line-level analogue I/O for Dante audio-over-IP networks
  • 24-Bit precision conversion up to 192kHz
  • 119dB Dynamic range, flat from 20Hz – 20kHz, +/-0.15dB
  • Software-selectable +24dBu or +18dBu level alignment
  • AES67 Compliant
  • Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
  • Word Clock I/O and DARS input for increased flexibility plus an additional two channels of AES3 I/O
  • Analogue I/O to AES59 standard on DB25 connectors
  • Comprehensive front-panel metering and indicators
  • Remote monitoring software with powerful graphic user interface

Focusrite RedNet A16R MKII Network Interface Specifications

  • Line Inputs:
    • 0 dBFS Reference Levels: +18 or 24dBu (Switchable)
    • Frequency Response: 20Hz – 20kHz ± 0.1dB
    • THD N:
    • EIN: -96dBu A-Weighted (Typical)
    • Signal-to-Noise Ratio: 120dB A-Weighted (Typical)
    • Converter Dynamic Range: 120dB A-Weighted (Typical), 10Hz – 20kHz
  • Line Outputs:
    • 0 dBFS Reference Levels Outputs: 18 or 24dBu (Switchable)
    • Frequency Response Outputs: 20Hz – 20kHz ± 0.1dB
    • THD N Outputs:
    • Noise in Presence of Signal: -94dBu A-Weighted (Typical)
    • Dynamic Range: 118 dB A-Weighted (Typical)
    • Converter Dynamic Range Output: 120dB A-Weighted (Typical), 10Hz – 20kHz
  • Crosstalk:
    • Input to Output or Input:
    • Output to Input or Output:
  • Digital Input Sample Rate Converters:
    • Sample Rate Range: 32kHz to 216kHz
    • Gain Error: -0.3dB
    • Dynamic Range Inputs: >138dB
    • THD N Inputs:
    • Latency: 11 to 45 Samples (Network and Sample Rate Dependent)
  • Digital Performance:
    • Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 Bit
    • Clock Sources: Internal or from Dante Network Master
    • External Word Clock Range: Nominal sample rate ±7.5
  • Rear Panel Connectivity:
    • Line Inputs: 2 x DB-25 Connectors
    • Line Outputs: 2 x DB-25 Connectors
    • Channel Count: 2 x 2 AES/EBU Channels
    • Input (Optional DARS): 1 x Female XLR (Switchable with Analogue Input Channels 15 and 16 at Quad Rates)
    • Output: 1 x Male XLR (Duplicate of Analogue Output Channels 15 and 16 at Quad Rates)
    • Word Clock Input: 1 x BNC 75 ohm Port (Switchable Termination)
    • Word Clock Output: 1 x BNC 75 ohm Port
    • PSU: 2 x IEC Inputs with Retaining Clips
    • Network: 2 x etherCON NE8FBH, also Compatible with Standard RJ45 Connectors
  • Front Panel Indicators:
    • Primary PSU (A): Green LED. Illuminates when An AC Input is Applied and All DC Outputs are Present
    • Secondary PSU (B): Green LED. Illuminates when An AC Input is Applied and All DC Outputs are Present
    • Primary Network: Green LED. Indicates that a Network Connection is Present on Primary Port When in Redundant Mode
    • Secondary Network: Green LED. Indicates that a Network Connection is Present on Secondary Port When in Redundant Mode
    • Network Locked: Green LED. When Unit is Network Slave, Shows Valid Network Lock
    • Sample Rate: Orange LED for Each: 44.1 kHz, 48 kHz, x2, x4
    • Pull Up/Down: Orange LED. Indicates that the Unit is Set to Operate on a Dante Pull Up/Down Domain
    • AES/EBU Signal Indicators: 2 I/O Signal Indicator LEDs
    • Clock Source: Orange LED for Each
  • Network Modes:
    • Redundant: Allows Unit to Connect to Two Independent Networks
    • Switched: Connects Both Ports to Integrated Network Switch Allowing Daisy-Chaining

Focusrite RedNet A16R MKII Network Interface Includes

  • Focusrite RedNet A16R Network Interface
  • 2 x IEC AC Mains Cables
  • 2 x IEC Mains Cable Retaining Clips
  • Safety Information Cut Sheet
  • RedNet Getting Started Guide
  • Product Registration Card, Which Provides Links to:
    • RedNet Control
    • RedNet PCIe Drivers (Included with RedNet Control Download)
    • Audinate Dante Controller (Installed with RedNet Control)
    • Dante Virtual Soundcard (DVS) Token and download instructions
  • User Guide
  • 2 Year Warranty

No review yet, Be first to Write a Review