Home > Recording > Audio Interfaces > Network Audio Interfaces >

  Focusrite RedNet 5 Network Interface

Focusrite RedNet 5
Focusrite RedNet 5
 
Alternative Views:


List Price: $1,199.99
Our Price: $999.99


Availability: Usually Ships in 24 Hours
Product Code: 9999-17273

 

Focusrite RedNet 5 Pro Tools | HD for DANTE

The Focusrite RedNet 5 Network Interface provides connection of the RedNet system to Pro Tools HD. RedNet is a near-zero-latency networking protocol which allows for easy system and I/O expansion while offering a wide range of connectivity options.

RedNet 5 connects your RedNet system to Pro Tools HD®. Up to six units can be connected to one Pro Tools HDX system, supporting up to 192 channels at 96 kHz or 96 channels at 192 kHz. Pro Tools HD® Native and Pro Tools HD® (TDM) are also supported. RedNet 5 is interoperable with other Pro Tools interfaces and no RedNet PCIe card is required.

What is RedNet?
RedNet is Focusrite’s flagship range of modular Ethernet-networked audio interfaces that harnesses the power of Audinate’s tried and tested Dante digital audio networking system to bring studio quality sound to any modern audio application. Fundamentally RedNet is an extremely scalable, near zero latency audio distribution system that can be used to expand I/O channel count, interface digital components, and/or bridge between Pro Tools|HD or MADI and the Dante audio network.

Focusrite RedNet 5 Network Interface Features

  • Upgrade to RedNet interfaces while remaining fully compatible with your saved sessions
  • Each RedNet 5 can route up to 32 input and 32 output channels between your RedNet network and Pro Tools HD system
  • Connecting six RedNet 5 units to a Pro Tools HDX system allows up to 192 inputs and outputs - the maximum supported by Pro Tools HDX
  • Maintain your existing Pro Tools workflow with simple, logical assignment of RedNet I/O to Pro Tools HD inputs and outputs
  • Compatible with Pro Tools HD® TDM systems

Focusrite RedNet 5 Network Interface Specifications

  • Digital Performance
    • Supported sample rates: 44.1 / 48 / 88.2 / 96 / 192 kHz
    • Clock sources: Internal, Word Clock, Loop Sync (master or slave) or from Dante Network Master
    • External Word Clock Range: Nominal sample rate ±7.5%
  • Rear Panel Connectivity
    • Pro Tools HD
      • RedNet 5: Primary, Expansion - DigiLink
      • RedNet HD32R: Primary, Expansion - Mini DigiLink
    • Loop Sync
      • Input: 1 x BNC 75Ω port
      • Output: 1 x BNC 75Ω port
    • Word Clock
      • Input: 1 x BNC 75Ω port (switchable termination)
      • Output: 1 x BNC 75Ω port
    • PSU & Network
      • PSU: 1 [2] x IEC Inputs [with retaining clips]
      • Network: 1 x RJ45 [2 x etherCON, also compatible with standard RJ45 connectors]
  • Front Panel Indicators
    • Power [PSU A]: Green
    • PSU B (HD32R only): Green
    • Network Connected [Primary]: Green
    • Secondary Network (HD32R only): Green
    • Network Locked: Green
    • Sample Rate: Orange
    • Pull Up/Down: Orange
    • Signal Indicators:
    • RedNet 5: 16 Tricolour LEDs
    • HD32R: 16 Green LEDs
    • RedNet Clock Source (HD32R only): Orange
    • Mode (RedNet 5 only): Orange
  • Network Modes (HD32R Only)
    • Redundant: Allows unit to connect to two independent networks
    • Switched: Connects both ports to integrated network switch allowing daisy-chaining of device
  • Power
    • PSU: 1 [2] x Internal, 100-240V, 50/60Hz, consumption 30VA

Focusrite RedNet 5 Network Interface Includes

  • RedNet 5 unit
  • IEC AC mains cable
  • 2m Cat 6 Ethernet cable
  • Safety information cut sheet
  • RedNet Getting Started Guide
  • Product registration card, provides links to:
    • RedNet Control
    • RedNet PCIe drivers (included with RedNet Control download)
    • Audinate Dante Controller (installed with RedNet Control)
    • Dante Virtual Soundcard (DVS) Token and download instructions

Focusrite RedNet 5 Network Interface Downloads

Click here to view all Focusrite products