Home > Recording > Audio Interfaces > Network Audio Interfaces >

  Focusrite RedNet 4 Network Interface

Focusrite RedNet 4
Focusrite RedNet 4
 
Alternative Views:


List Price: $2,999.99
Our Price: $2,499.99


Availability: Usually Ships in 24 Hours
Product Code: 9999-17272

 

Focusrite RedNet 4 Network Interface

The Focusrite RedNet 4 provides the addition of 8 remote-controlled microphone preamps featuring precision AD conversion for use with a RedNet digital audio networking system. RedNet is a near-zero-latency networking protocol which allows for easy system and I/O expansion while offering a wide range of connectivity options.

RedNet 4 adds eight of the latest remote-controlled Focusrite mic preamps / line inputs to your RedNet system through a single Ethernet cable. With two selectable DI’s, RedNet 4 provides an effective range of analogue inputs for your system. The unit includes Focusrite’s world-class precision A-D conversion. Mic/Line/DI selection, gain, phantom power, HPF and metering are also accessible from the front panel. The benefit of remote control microphone pre-amp gain is that you can keep the mic pre close to the source (so the analogue cable run is minimal) while still setting gain stages from the control room.

What is RedNet?
RedNet is Focusrite’s flagship range of modular Ethernet-networked audio interfaces that harnesses the power of Audinate’s tried and tested Dante digital audio networking system to bring studio quality sound to any modern audio application. Fundamentally RedNet is an extremely scalable, near zero latency audio distribution system that can be used to expand I/O channel count, interface digital components, and/or bridge between Pro Tools|HD or MADI and the Dante audio network.

Focusrite RedNet 4 Network Interface Features

  • Eight high-quality Focusrite 'RedNet' mic preamps
  • DC-coupled signal path for characteristically open and transparent sound
  • Selectable line and DI inputs for input flexibility
  • Remote-controllable Gain, Phantom Power and High-Pass Filter from Yamaha CL and QL Series Consoles.
  • Dynamic range: 119dB
  • THD+Noise: <0.001%
  • Mic input Level up to +16dBu
  • Max mic input gain: 63dB
  • JetPLL™ jitter-reduction technology

Focusrite RedNet 4 Network Interface Specifications

  • Microphone Inputs
    • Gain range: 0 dB; 8 to 63 dB in 1 dB steps
    • Type: Electronically balanced, Zin = 2.4 kohms
    • Max. input level: +16 ±0.5 dB; min. gain for 0 dBFS, Rs = 150 ohms, pad out
    • Min. input level: -47 ±0.5 dB; max. gain for 0 dBFS, Rs = 150 ohms, pad out
    • Frequency response: 20 Hz – 55 kHz ±0.1 dB (-3 dB @ 80 kHz, fs = 192 kHz); Rs = 150 ohms
    • THD+N: < 0.0007% @ -1 dBFS; +15 dBu input, Rs = 150 ohms, 20 Hz – 22 kHz
    • Noise: EIN -128 dB; 60 dB gain, Rs = 150 ohms, 20 Hz – 22 kHz
    • Phantom power: 48 V, independently switchable per-channel
    • Signal-to-noise ratio: 119 dB ‘A’-weighted; Rs = 150 ohms
  • Line Inputs
    • Gain range: -12 to 42 dB in 1 dB steps
    • Max. input level: +24 ±0.5 dB; min. gain for 0 dBFS
    • Min. input level: -30 ±0.5 dB; max. gain for 0 dBFS
    • Frequency response: 20 Hz – 20 kHz ±0.1 dB
    • THD+N: ﹤ 0.003% @ -1 dBFS; +23 dBu input, min.gain, 20 Hz – 22 kHz
    • Signal-to-noise ratio: 117 dB ‘A’-weighted
  • Instrument Inputs (Inputs 1 & 2 only)
    • Gain range: +14 to 68 dB in 1 dB steps
    • Max. input level: +10 ±0.5 dB; min. gain for 0 dBFS
    • Min. input level: -44 ±0.5 dB; max. gain for 0 dBFS, pad out
    • Frequency response: 20 Hz – 20 kHz ±0.1 dB
    • THD+N: ﹤ 0.001% @ -1 dBFS; +9 dBu input, min.gain, 20 Hz – 22 kHz
    • Signal-to-noise ratio: 112 dB ‘A’-weighted
  • Analogue High-Pass Filters
    • Selection: Independently switchable per-channel
    • Frequency/slope: -6 dB @ 65 ±3 Hz, 12 dB/octave
  • Crosstalk
    • Input to input:﹤-80 dB (all other channels at 0 dBFS)
  • Digital Performance
    • Supported sample rates: 44.1 / 48 / 88.2 / 96 / 192 kHz
    • Clock sources: Internal or from network master device
  • Power
    • PSU: Internal, Universal type, consumption 30 VA
  • Front Panel Indicators
    • Power: Green
    • Network connected: Green
    • Sync lock: Green
    • Sample rate: Yellow x 5
    • Channel 1/2 source: Yellow x 3 (mic/line/inst)
    • Signal level: Green x 8 (-42 dBFS); Yellow x 8 (-6 dBFS); Red x 8 (overload)
    • Channel select buttons: 8
    • Channel function controls: Input source, HPF, phantom power, Gain encoder
    • Channel display: Colour OLED; channel number, input source, gain

Focusrite RedNet 4 Network Interface Includes

  • RedNet 4 unit
  • RedNet 4 User Guide (this manual)
  • RedNet System User Guide
  • 2 m Cat6 Ethernet cable
  • IEC AC mains cable
  • Product registration card with Bundle Code. Registration gives access to:
    • RedNet Control
    • RedNet drivers (installed with RedNet Control)
    • Audinate Dante Controller (installed with RedNet Control)
    • Dante Virtual Soundcard token and download instructions
    • RedNet 4 User Guide (this document) – PDF format
    • RedNet System User Guide – PDF format

Focusrite RedNet 4 Network Interface Downloads

Click here to view all Focusrite products


You may also need...
Focusrite RedNet PCIe Network Interface Card
Our Price: $999.99

Add
Focusrite RedNet PCIe Card