Home > Rack Gear > Preamps > Accessories >

  Focusrite ISA 8-Channel A/D Option (for ISA428 and ISA828)

Focusrite ISA 8-Channel A/D Option
Focusrite ISA 8-Channel A/D Option
Save 10% on this product today by using discount SAVETEN during checkout!
List Price: $624.99
Our Price: $499.99

Availability: Usually Ships in 24 Hours
Product Code: 9999-01766


Focusrite ISA 8-Channel A/D Option (for ISA428 and ISA828)

Focusrite ISA828 A-D Card

Focusrite ISA 8-Channel A/D Option (for ISA428 and ISA828) Details

The Focusrite ISA 8-Channel A/D Option (for ISA428 and ISA828) operating at sample rates up to and including 192kHz, outperforms every other converter yet devised, and is the first audio A-D converter to utilise Burr-Brown Pro Audio Amplifiers and flagship PCM4220 A-D converter chips. With cutting-edge conversion technology seated within Focusrite custom analogue circuitry, the card delivers unparalleled performance; specifications include a dynamic range of 122dB and jitter less than 250 picoseconds.

The card can be retrofitted to an ISA 428 or ISA 828 at any time and, thanks to its convenient 25-pin D-Type connector, integrates seamlessly with ProTools HD as well as other popular hard disk recorders and mixing desks.

Digital formats include an eight-channel single/dual wire AES/EBU and S/PDIF output, as well as an eight-channel ADAT lightpipe (SMUX/SMUX2) output. Word clock i/o is provided via dedicated BNC connectors.

About Focusrite A/D Converters

Just paying for the PCB and circuitry, without any additional casing and metalwork, affords a considerable reduction in cost whilst maintaining an extremely high level of sonic clarity. However, the benefits from installing Focusrite"?s optional ADC extend far beyond the obvious financial advantages and space saving issues. As most converters use the same chips, it is the quality of the surrounding analogue circuitry that makes the difference. This is the reason why the ISA ADC is unrivalled in terms of both price and performance.

Focusrite"?s R and D team have carefully considered the organisation of the PCB layout and grounding, ensuring that the S/N ratio and linearity of the converter are optimised. The noise floor and THD (Total Harmonic Distortion) are kept to a minimum by the nature of the power supply and the analogue input design, with analogue filtering positively effecting the sound of the digital noise.

In addition, the supporting circuitry around the ADC (dealing with data transmission, bit reduction and incoming word clock) has been carefully structured, as it influences the converter through heat, power supply and data jitter. One of the most important aspects of the ADC is the clock design, as this determines the linearity of the digital output. All Focusrite ADCs are designed to have incredibly low jitter figures (44.1kHz-192kHz < 20 psec) which significantly improve the quality of the sound.

With the converters housed within the analogue units, the signal path is kept as short as possible, having no unnecessary analogue connections to the inputs of recording equipment. In addition, Focusrite units do not contain extraneous clocks or other sources of digital noise, unlike so many digital desks and multi-I/O DSP configurations.

Focusrite ISA 8-Channel A/D Option (for ISA428 and ISA828) Specifications

  • Output formats (All channels):
    • AES/EBU (5V / 110 ohms), S/PDIF (0.8V / 75 ohms)
    • ADAT lightpipe (SMUX I/II/IV, channels 1-4 only in 176.4kHz, 192kHz mode)
    • S/PDIF lightpipe (channels 1-4 only; mutually exclusive with ADAT lightpipe)
  • Bit depth:
    • 24 bits, internally configurable to 16 or 20 bits if necessary.
    • AES3 output jitter:
      • <:1500ps, 50Hz-100kHz
      • <:350ps, 700Hz-100kHz
  • Frequency response:
    • All ranges: 20Hz""20kHz 0.3dB (100Hz""20kHz 0.1dB)
    • 176.4kHz, 192kHz : 17Hz""90kHz 0.5dB
  • THD+n:
    • ""121.5dB A-weighted, audio band-limited, 1kHz, -60dB FS input
    • Maximum 0.0033% at ""1dB FS (1kHz)
    • Minimum 0.0008% at ""15dB FS (1kHz)
  • Idle channel noise:
    • 117.5dB at 44.1kHz, CCIR-weighted, full bandwidth
  • Crosstalk:
    • ""100dB at 12kHz
  • (paired channels)
    • ""95dB at 20kHz

Focusrite ISA 8-Channel A/D Option (for ISA428 and ISA828) Downloads

Click here to view all Focusrite products

You may also need...
Focusrite ISA428 MKII 4-Channel Mic Preamp Focusrite ISA828 8-Channel Mic Preamp
Our Price: $1,499.99

Our Price: $2,499.99

Focusrite ISA428 MKII Focusrite ISA828

Average Customer Review 5 of 5 Total Reviews: 1 | Write a review!

  0 of 0 people found the following review helpful:
Worth the Extra $$ March 12, 2014
Reviewer: Stephen Lawson from Minneapolis, MN United States  
Again a flawless tie-in with my main AD/DA TC Electronic SK48. If fact it worked so well I didn't realize it was all set up after powering up the unit. "BIP" all channels present and accounted for.

Was this review helpful to you?