Home > Monitoring > Monitors >

  Focal Sub6 Be Subwoofer

Focal Sub6 Be
Focal Sub6 Be
 
Alternative Views:


List Price: $1,995.00
Our Price: $1,850.00


Availability: Usually Ships in 24 Hours
Product Code: 9999-16791

 

Focal Sub6 Be Subwoofer

The Focal Sub6 Be Subwoofer is an active subwoofer (1 integral amplifier) designed for professional monitoring systems. It uses a 11 drive unit equipped with a W composite cone, and loaded by a large cross-section laminar port.

The Sub6 is an active subwoofer (1 x 350W RMS built-in amplifier - BASH technology) for professional monitoring systems. The driver is an 11" Focal with a "W" sandwich composite cone loaded by a large section laminar port. It can be used both as LFE channel in a surround system or as a bass or sub-bass complement in a stereo system (2.1 or 2.2) - more on this, below. The Sub6 was designed to permit optimum acoustic coupling with professional monitoring speakers. Therefore, it includes all the features to achieve this task, such as stereo high pass filter (75 or 100Hz) for the left and right satellites, low pass filter (adjustable) with mono summation, phase inverter, phase fine tuning, mute switch, 2.1 bypass with a footswitch remote control (not included), as well as a wiring panel rich in possibilities.

The Sub6 may be used for bass or sub-bass enhancement in stereo + sub setups (2.1 or 2.2). The rear panel of the Sub6 allows for the connection of a traditional stereo source (Left In / Right In), while providing hi-passed outputs intended to feed the main speakers (satellites). It may also be used as a LFE channel (Low Frequency Effects) in a multi-channel installation (5.1, 5.2, 6.1), via a dedicated input of the rear panel.

The W cone
Focal has been developing the technologies of composite sandwich cones for more than 15 years. The "W" process (Glass/Foam/Glass), used on the SM11, SM8 and SM6 lines, provides a true optimization of the frequency response by fine tuning of mass, rigidity and damping parameters. The balance between these 3 fundamental and often contradictory parameters is at the base of the outstanding sound neutrality of our speakers.

The 105/8"(27cm) Focal speaker is equipped with a high excursion system to enable accurate and extended reproduction in the bass/infra bass register. The 25/8" (66mm) diameter and 11/4" (32mm) height voice coil ensures a perfect mechanical coupling and a total control of the driver even at high sound level. The magnetic construction made of double ferrite and large field and back plates offers high symmetrical magnetic field to keep dynamics even at very low frequency.

A custom designed amplification stage
Designing an amp to be integrated inside a speaker requires a very different set of rules than for a traditional amp. Speaker size and cooling concerns are often in contradiction with the high quality and high power requirements of a sonically transparent speaker.

Focal's engineers used the BASH technology to develop the bass/medium amplification circuit for the SM6 professional line of speakers. This was the only way to exploit the best of class AB style circuits (for exceptional quality) with a class D type yield, which is crucial when housing a 150W RMS circuit in such a small space (300W RMS for the Twin6 Be and 350W RMS for the Sub6).

Positioning
Optimal positioning of the Sub6 may vary depending on the surface, the shape and acoustic properties of the listening room. You are advised to try various locations so to choose the one giving the best possible and most level sound balance. As a rule of thumb the optimal location will often be in a corner of the room.

Focal Sub6 Be Subwoofer Features

  • Provides bass reinforcement for the Solo6 Be and Twin6 Be studio monitors
  • 11" "W" composite sandwich cone driver is housed in a high-volume MDF cabinet
  • Cabinet has a rear laminar bass port, which helps extend bass response all the way down to 30Hz
  • Right, left, and LFE balanced XLR inputs for connecting to pro-level audio systems
  • 1/4" footswitch input allows you to connect a pedal for hands-free control
  • Signal treatment and control options include mono left/right summation, phase adjustment, polarity switch, high/low pass filters, level control, muting, and bypass

Focal Sub6 Be Subwoofer Specifications

  • Performance
    • Frequency response: 30Hz - 250Hz
    • Maximum SPL: 116dB SPL (peak @ 1m)
  • Electronic section
    • Inputs: Right, left, LFE
      • Type / Impedance: Electronically balanced / 10 kOhms
      • Connector: XLR 3 points socket
      • Sensitivity: Adjustable
    • Outputs (towards satellites): Right, left
      • Type/Impedance: Electronically balanced / 50 Ohms
      • Connector: XLR 3 points plug
    • Amplification: 350W rms, BASH technology
    • Signal internal treatment and functions
      • Subwoofer section
        • Mono right/left summation
        • LFE + mono low-pass
        • 24dB / octave
        • Phase adjustment
        • Polarity selection switch
        • Switch high-pass filter, cut-off frequency selection
      • Satellite section: 24dB / octave
    • Control
      • Adjustable subwoofer level
      • Low-pass cut-off frequency setting
      • Phase adjustment
      • Polarity adjustment
      • Subwoofer switch (mute)
      • 2.1 Bypass (external remote control)
      • High-pass frequency selection
      • Releasable high-pass
    • Visualization (LED)
      • Power On
      • Subwoofer switch(mute)
      • Released high-pass
    • Power supply
      • Local supply: 230V (1.6A fuse) or 115V (3.15A fuse)
      • Connection: Removable CEI supply wire
  • Transducers
    • Subwoofer: 11W7670, 105/8" (27cm) Focal W composite sandwich cone driver
  • Cabinetwork
    • Construction: 71/2" (19mm) MDF panels
    • Finish: Dark red natural veneering side panels, black body
    • Dimensions (HxLxD): 1415/16 x 139/16 x 175/16" (380mm x 344mm x 440mm)
    • Weight: 50.7lb (23kg)

Focal Sub6 Be Subwoofer Includes

  • 1 x Sub6 Be Subwoofer
  • 1 x User Guide / Owners Manual
  • 1 x IEC power cable
  • 1 x Warranty / guarantee card
  • 1 x Grille protecting the drive unit (which it is advisable to remove whenever possible)

Focal Sub6 Be Subwoofer Downloads

Click here to view all Focal products


You may also need...
Grace Design m905 Analog Monitor Controller Focal Trio6 Be Studio Monitor (Pair) Focal Solo6 Be Studio Monitors (Pair) Focal Twin6 Be Studio Monitors (Pair)
Our Price: $2,370.00

Add
Our Price: $5,590.00

Add
Our Price: $2,700.00

Add
Our Price: $3,700.00

Add
Grace Design m905 Analog Focal Trio6 Be (Pair) Focal Solo6 Be Focal Twin6 Be