Home > Rack Gear > Compressors > Single Channel >

FMR Audio RNLA "Really Nice" Levelling Amplifier

Alternative Views:

List Price: $249.00
Our Price: $225.00

Availability: Usually Ships in 24 Hours
Product Code: 9999-06430

The following items are included FREE:


FMR Audio RNLA "Really Nice" Levelling Amplifier

The FMR Audio RNLA Really Nice Levelling Amplifier is a compressor with a thick and gooey character that works well with vocals, bass guitar, acoustic guitars and two-mix sources! You have to have at least one in your studio!

A friend describes the RNLA's tone as "thick and gooey". Some very well-outfitted RNLA users report that even with a full complement of expensive, vintage levelling amps/compressors, the RNLA still fills a niche that the others don't!

The sonic performance of the RNLA harkens back to the Really Nice Compressor's (RNC's) origins. The original RNC was, in fact, based upon an optical gain element that was ultimately rejected (and tucked away) due to its imparting of a sonic signature (i.e., "color"). However, just like trying to throw away a ball of adhesive tape, this one has also stuck! What's the old saying? What's old, is new again? The implementation is a little different (i.e., no opto) from the 1984 version, but the final sound is eerily similar...

Special Note:
The FMR Audio RNLA now utilizes a 12VDC power supply, and is not compatible with older 9VAC models or power supplies.

FMR Audio RNLA Really Nice Levelling Amplifier Features

  • Wide Dynamic Range
    • Despite the unbalanced input/output connections, the RNLA has a dynamic range of 117dB, minimum, which is appropriate for today's digital systems and exceeds that which is attainable with many older, vintage levelling amplifiers. The RNLA offers a clip point (<3% THD) of 22.5dBu.
  • Fidelity
    • Although the RNLA is designed to dynamically "color" the sound passing through it, the channel electronics are fairly neutral and designed so that the output signal (statically measured) closely resembles the input signal (fidelity defined...though slightly paraphrased). Each channel is hand-trimmed to typically less than 0.005% Total Harmonic Distortion plus Noise (THD+N). Even this low-level distortion is predominantly second-order...a much less heinous form of distortion and agreed by many to impart a slight "sweetness" to a signal.
  • Ugly and Cheesy Box
    • Like its FMR brethren, the RNC and RNP, FMR uses a third-rack cabinet (still a hearty combination of extruded aluminum and steel) to allow them to throw the money they save in cosmetics into the quality of the audio electronics. Although FMR did decide to splurge a little by putting very red knobs on it along with a brushed-aluminum LexanTM overlay for that more impressively cheesy, "homegrown" look!
  • Easy-to-Read Panel Graphics
    • This may seem like an arbitrary and trivial point, but FMR thinks it's important: easily assessing the settings on a rack-mounted processor is important when you've got a lot of stuff going on during a recording session. Usually, dark lettering on a light background works better than the other way around.
  • Inputs and Inserts
    • As with the RNC, the RNLA has unbalanced inputs that also double as Tip-Ring-Sleeve (TRS) inserts to mate with popular mixer and equipment inserts. This allows you to connect, using only a single TRS-to-TRS cable per channel, an RNLA's channel (in & out) with a single cable to a mixer or other compatible device (such as FMR's own Really Nice Preamp, Great River Electronics MP-NV preamp, etc.).
  • Balanced Outputs
    • The RNLA has balanced, non-differential outputs. Although the "cold" part of the signal is not driven (that would be a "differential" signalling scheme), the impedance in both legs are the same, thereby giving your audio the benefit of reduced noise if the RNLA is connected to a balanced line input.
  • Precise Gain Reduction Metering
    • A highly accurate gain reduction meter is provided to allow visual verification of what you're hearing. Although meters should never be a substitute for what you hear, a dynamically accurate meter is better than one that can "lag" or misread the actual dynamic performance of the compressor. Due to the digitally-controlled architecture, even the peak-detection errors of a pure digitally-implemented meter are avoided and a dynamically accurate meter is obtained.
  • Full Parametric Control
    • Some of the more common Levelling Amplifiers don't have full parametric control. Many LA's are missing the ability to control the ATTACK time. Some of them don't even provide a RATIO control, let alone a continuously-variable RATIO control! The RNLA provides both for maximum artistic flexibility. But, most importantly, both the ATTACK and RELEASE controls go to 11! In addition, all of the front panel controls are merely a "control surface" for the RNLA's internal digital engine. This means: (a) No main channel audio flows to/from the front panel controls that might increase its noise susceptibility (that's bad) or dreaded "scratchy pot syndrome" (that's annoying), and, (b) FMR can use a "ratiometric" measuring technique, along with robust digital filtering, to derive repeatable and precise compression parameters (that's good, if not a little geeky). Did we mention that the ATTACK and RELEASE controls both go to 11?
  • Alternative Release Contour
    • Loosely based upon the "Log/Lin" control on the Valley People's (Person's?) Gain Brain II, this control ("Log Rel") can help restore some "punch" that can get lost without an acceleration of the release envelope. So, when Log Rel is on, the release time is accelerated as a function of gain reduction amount. FMR has found this to be particularly handy on drum sub-mixes where one still wants the drums to "punch", but in a compressed and controlled way (you know, it's really true: talking about audio is like dancing about architecture...).
  • Made In The U.S.A.
    • FMR wants you to know that they do their own manufacturing in beautiful Austin, Texas cause: (a) They live there. The're control freaks. They need things done to standards that are very specific and loftier than most. Manufacturing products there helps control important costs and reduce waste (there's more to producing a product than just considering the costs of labor and parts). All this helps ensure that your RNLA will retain its value and continue compressing for many years to come, (b) Austin's resources and culture--from a very lively music scene to lots of high-tech companies/products--help inspire and maintain FMR's commitment to music and technology, and, (c) In order to help others, here and abroad, FMR believes they've got to be vital and capable themselves. Their first choice is to employ as many U.S.-based resources as possible in the design, manufacture and distribution of their products.
  • Usable
    • The RNLA is designed for the real world. That means its knobs are spaced so you can turn them without screwing up other settings, and FMR carefully selected its fonts and colors so you can read your settings from across the room regardless of lighting conditions.
  • Visually Annoying
    • You can't escape, the BIG RED KNOBS! Even from across the room, they beckon "Turn me! Turn me!". Once you've turned one, you'll be hooked...
  • Flexible
    • The RNLA can be wired in two ways, using TRS or TS cables. TRS cables allow you to connect the RNLA directly to mixer inserts with one cable per channel; TS cables allow for other applications, such as patchbay connections. The sidechain uses a TRS connection; use an insert cable to connect it to a normalled patchbay.

FMR Audio RNLA Really Nice Levelling Amplifier Specifications

  • Size: 1/3 x 1 EIA rack unit
  • Connectors
    • Left/Right 1/4" unbalanced inputs (TS, or TRS for console inserts)
    • Left/Right 1/4" balanced, single-ended outputs
    • TRS sidechain (Tip = OUT, Ring = RETURN)
  • Controls and Displays
    • Rotary: Threshold, Ratio, Attack Time, Release Time, Output Level
    • Switches: Bypass, Mode Select
    • Meter: 8-segment LED Gain Reduction, 0-16 dB
  • Modes
    • Normal: Provides fast attack/release
    • Log Rel: Provides release envelope acceleration to aid maintenance of transient "punch"
  • Operating Level
    • 0.775 Vrms (0 dBu) nominal for +22 dB headroom
    • 1.228 Vrms (+4 dBu) nominal for +18 dB headroom
  • Noise
    • Less than -90 dBu over 20-20k Hz
    • Typically -95 dBu over 20-20k Hz
    • Frequency response: 10 - 100k Hz 0.5dB @ 0 dBu
    • Clip point: +22.5dBu @ 3% THD, 1kHz, greater than 2k Ohm load
  • Distortion
    • Less than 0.1%, no gain reduction @ 1 kHz, 0 dBu;
    • Less than 0.5%, 6 dB G.R. @ 1 kHz, 6:1, 6.0 msec attack, 0.5 sec. release, 0 dB gain, 0 dBu
  • Threshold range: -40dBu to +20dBu
  • Ratio range: 1:1 to 25:1
  • Attack range: 0.2 msec to 200msec for 100% correction with <15dB over threshold input signal
  • Release range: 0.05 sec to 5.0 sec for 100% recovery with 15dB G.R.
  • Output trim range: 15dB
  • AC Power: Wall transformer, 12VDC
  • Dimensions: 5.5" x 5.5" x 1.6"
  • Weight: 2 lbs

FMR Audio RNLA Really Nice Levelling Amplifier Includes

  • RNLA
  • Power Supply
  • Manual (downloadable)

FMR Audio RNLA Really Nice Levelling Amplifier Downloads

What We Think

So you have a tight budget, but do not want to sacrifice quality? Keep FMR on your radar. The RNLA is by far one of the coolest leveling amps I have used. It has a ton of color/character, but executes it in a very smooth and impressive way. You can hit it hard with a fast attack and release for a thick and gooey drum buss, that will get you some very cool parallel compression mixes or you can keep the attack fast and set the release slower to hold a bass or aggressive vocal in that right place. Slow the attack and affect the RMS, while coating the transients in a nice character without compressing them, or get some comp pump that is extremely music. The FMR RNLA is a very versatile stereo leveling amp with a great character and is a killer value. So whether you are on a budget or just need an extra comp around, this is a no brainer. After using it on just a drum buss, I decided that my RNC will have a new brother in the rack next to it.

- Ryan

Click here to view all FMR Audio products

You may also need...
Funk Logic NCC-1701 1U Rack Tray for 2 FMR Audio RNC Compressors FMR Audio RNC "Really Nice" Compressor FMR Audio Rack Shelf
Our Price: $59.00

Our Price: $175.00

Our Price: $35.00

Funk Logic NCC-1701 FMR Audio RNC FMR Audio Rack Shelf

Average Customer Review 5 of 5 Total Reviews: 9

| Write a review!

  0 of 1 people found the following review helpful:
Thank You February 26, 2016
Reviewer: Andrey Burlakov from San Francisco, CA United States  
Recently purchased something online and the experience has been most favorable. Ryan has been very helpful with addressing any concerns and has followed up on shipping prior to our direct communications.
Looking forward to shopping with Frontendaudio in the future.
All the best

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Fantastic leveling amp for the price! November 19, 2014
Reviewer: Richard Ordoubegian from Monterey Park, CA United States  
This is my second FMR purchase & got to say these guys make a great product for the money! The RNLA has nice warmth + great headroom for various applications.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Great Service Great Product July 2, 2013
Reviewer: BRYAN USINGER from EAST. STROUDSBURG, PA United States  
My go to bass compression.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
good cheap compressor May 25, 2012
Reviewer: DW from Manassas, VA United States  
This compressor unlike the RNC has some color to it.  I like it for smoothing out bright sources like acoustic guitar and drum overheads (cymbals) two tasks that I think it really excells at.  I was not too impressed with it on vocals or bass.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
Predictable Perfection May 16, 2012
Reviewer: nicholas d'angelo from torrance, CA United States  
i have 3 of FMR's products. i use the Leveller, Preamp and the Compressor for my podcast. the sound of the microphone going into the mixing board is present, pure and powerful. those who listen to my podcast always tell me how better i sound than anyone else. i use either a Shure Sm7b or a Lawson FET and besides the podcast, i am also recording simultaneously and so with the 3 FMR units in the chain i get perfect recordings going into my Zoom H4n. i have had a year of hassle-free podcasting and recording thanx to FMR

Was this review helpful to you?

View All Customer Reviews