| Electro Voice EV RE16 Dynamic Supercardioid Microphone Details
The Electro-Voice Model RE16 is a Variable-D dynamic supercardioid microphone designed for the most exacting professional use. It is like the RE15, except that it uses a unique blast filter. The blast filter, an integral part of the RE16, permits hand-held and outdoor use without “P-popping” or excessive wind noise. Utilizing the Variable-D design the RE16 features a directional characteristic independent of frequency. The result is a microphone that generates little off-axis coloration while providing the greatest rejection of unwanted sounds. A super-cardioid, the RE16 provides its greatest rejection at 150° off axis. (Typical cardioids provide greatest rejection in the horizontal plane when the microphone is tilted in its most natural position -30° from horizontal as on a boom or floor stand). An easily operated “bass-tilt” switch corrects spectrum balance for boom use and other longer reach situations.
Electro Voice EV RE16 Dynamic Supercardioid Microphone Specifications
- Element: Dynamic
- Frequency Response: 80-15,000 Hz
- Polar Pattern: Super-cardioid
- Impedance: Lo-Z (150 ohms nominal)
- Output Level: -56 dB (0 dB = 1 mW/lO dyneslcmz)
- EIA Sensitivity Rating: -150 dB
- Hum Pickup Level: - 125 dBm (re: ,001 gauss field)
- Diaphragm: Electra-Voice Acoustalloy
- Case Material: Steel
- Dimensions: 187.3 mm (7.38 tn.) long, 45.2 mm (1.78 in.) diameter 19.1 mm (0.75 in.) shank diameter
- Finish: Fawn beige micomatte
- Net Weight: 227 g (8 oz), not including cable
- Cable: 4.6 m (15 ft), two-conductor, shielded, broadcast-type cable, rubber-jacketed with Switchcraft A3F connector
- Accessories Furnished: Model 310A stand adapter, Zippered vinyl pouch
|
