Details

Earthworks' 1022 2-channel preamp is as professional as it is no-frills. There are no bells and whistles on the 1022 - and no hum or distortion either. If you've been looking for a microphone preamp that conforms to the highest standards of professionalism, you've found it! The sum of noise plus all types of distortion is 1 part per million. The distortion and noise is so miniscule, it's practically non-existent! Each channel has an XLR input, and you can apply phantom power via a front panel switch. The phase can be reversed and the channel muted by other front panel switches. Transparent gain is switchable from 5 dB to 60 dB in 5 dB steps. What's more, the 1024 has a 10 volt nominal output capability to take advantage of the capabilities of 24-bit digital.

Features

• Zero Distortion - less than one part per million
• Lowest Noise of any preamp on the market
  Full Differential (balanced) from XLR in to XLR out – no internal conversion to single ended
• All Discrete Components; Class A Amplification (No ICs in the signal path)
• No Electrolytic Capacitors in the signal path
• Greater Transparency with minimum signal path and minimum features
• High output level +33dBu
• Very Low Output Impedance will drive long lines without interference or signal loss
• True 48 volt phantom, polarity reverse & clip indicator
• Separate XLR & 1/4” Phone (t-r-s) outputs, each with its own gain/level controls
• 1/4” Phone connector output will drive balanced or unbalanced inputs

Other Links
Manual