Home > Microphones > Wireless & Live Sound > Podium Microphones >

Earthworks IML6-S Installation Microphone

Earthworks IML6-S Installation Microphone
Earthworks IML6-S
Alternative Views:

List Price: $1,174.00
Our Price: $939.00

Availability: Call for Availability
Product Code: 9999-16455


Earthworks IML6-S Installation Microphone

Earthworks IML6-S LumiComm Touch Ring Cardioid Installation Microphone with 6" Gooseneck, Silver - 30Hz-30kHz

Earthworks IML6-S Installation Microphone Details

Earthworks IML6-S Installation Microphone provides a low profile, pristine sounding microphone solution for permanent sound installations. The extended flat frequency response and near-perfect polar response allows orators to maintain the same intelligibility at the front and sides of the microphone without a loss of high frequencies, while obtaining more gain before feedback. Earthworks IML6-S Installation Microphone provides 30Hz to 30kHz frequency response, with pristine audio in an attractive low-profile package with 6 inches mini-gooseneck. The LumiCommâ"˘ dual color Touch Ring LED is touch sensitive and is powered from an external power source of 8 to 28VDC @ 85-170 mA (current is dependent upon number of LEDs illuminated at one time). Earthworks IML6-S Installation Microphone provides exceptional sound quality, with very high intelligibility, high rejection of sounds at the rear of the microphone, more gain before feedback and near-perfect polar response.

Earthworks IML6-S Installation Microphone is the ideal choice for high quality sound system installations. Earthworks IML6-S Installation Microphone's uniquely designed small head and flexible noise-free mini-gooseneck allow it to be easily positioned. Earthworks IML6-S Installation Microphone's near-perfect polar response will not beam or spotlight and will provide high intelligibility. The frequency response at 90 degrees off-axis is within 2dB of the on-axis response (over its entire operating frequency range). This exceptional polar response allows the use of fewer microphones, while obtaining higher intelligibility and more gain before feedback. Earthworks IML6-S Installation Microphone is the perfect solution for conference tables, conference rooms and a wide varity of sound installations, while providing the ultimate in sound quality.

David Blackmer invented a number of new microphone technologies resulting in a totally new approach to microphone design. One such technology resulted in the creation of near-perfect polar patterns. When you look at a polar pattern of an Earthworks microphone, the mid-frequencies, high-frequencies and lowfrequencies all look very close to a â??textbookâ?ť perfect polar pattern. In practice this means the polar response of an Earthworks microphone is extremely uniform over its operating frequency range; the frequency response at 90 degrees off-axis is very close to the on-axis response. This uniform polar response results in less phase problems and much higher intelligibility at the sides of Earthworks IML6-S Installation Microphone.

Earthworks IML6-S Installation Microphone Features

  • 30kHz flat frequency response
  • Uniform frequency response on or off axis
  • More gain before feedback
  • Picks up almost no sound from the rear of the microphone
  • Near perfect polar pattern
  • Gooseneck allows quick and easy positioning
  • Silver finish on exposed sections
  • Programmable touch sensor output
  • Programmable dual-colored LED light ring
  • Light ring engineered for a wide supply voltage range (From 8V to 28V regulated supplyâ?"No external LED resistors needed)
  • Touch sensitive flange that provides a pull down touch sensor output (Active Low)
  • Light diffuser that houses 10 LEDs providing side illumination (5 Green, 5 Red)
  • Current consumption 85mA
  • Supplied with either a 5 pin RJ45 connector or a 5 pin Phoenix connector
  • Primary applications include teleconferencing, distance learning, surveillance, boardrooms, government facilities, and ambient room miking

Earthworks IML6-S Installation Microphone Specifications

  • Manufacturer: Earthworks
  • Product: IML6-S Installation Microphone
  • Frequency Response: 30Hz to 30kHz ±2dB at 12 inches (30.5cm)
  • Polar Pattern: Cardioid
  • Sensitivity: 10mV/Pa (-40dBV/Pa)
  • Power Requirements: 48V Phantom, 10mA
  • Max Acoustic Input: 145dB SPL
  • Output: XLR (pin 2+)
  • Output Impedance: 100 ohm balanced (50 ohm each pins 2 & 3)
  • Min Output Load: 600 ohm between pins 2 & 3
  • Noise: 22dB SPL equivalent (A weighted)
  • Gooseneck Length: 6" (152mm)
  • Microphone Color: Silver
  • Weight: 0.28 lbs. (125g)

Earthworks IML6-S Installation Microphone Downloads

Click here to view all Earthworks Products