Home > Microphones > Wireless & Live Sound > Podium Microphones >

Earthworks IM10-B Installation Microphone

Earthworks IM10-B Installation Microphone
Earthworks IM10-B
Save 10% on this product today by using discount SAVETEN during checkout!
List Price: $899.00
Our Price: $719.00

Availability: Usually Ships in 24 Hours
Product Code: 9999-16437


Earthworks IM10-B Installation Microphone

Earthworks IM10-B Installation Microphone

Earthworks IM10-B Installation Microphone Details

Earthworks IM10-B Installation Microphone provides a low profile, pristine sounding microphone solution for permanent installations. Featuring a flat frequency response and patented polar technology, orators will maintain the same intelligibility throughout the room without a loss of high frequencies.

Earthworks IM10-B Installation Microphone can be custom mounted in a ceiling, wall or table and will provide the ultimate in sound quality, flexibility and ease of installation. Earthworks IM10-B Installation Microphone's uniquely designed small head and 10 inch mini-gooseneck allow it to be easily and precisely positioned. Comes in an attractive black finish.

Earthworks IM10-B Installation Microphone's near-perfect polar response will not beam or spotlight and will provide very high intelligibility. The frequency response of both the cardioid or hypercardioid at 90 degrees off-axis is within 2dB of the on-axis response (over its operating frequency range). This overall uniform frequency response of the hypercardioid is at least 5dB down at 90 degrees off-axis. This exceptional polar response allows the use of fewer microphones, while obtaining higher intelligibility and more gain before feedback.

David Blackmer invented a number of new microphone technologies resulting in a totally new approach to microphone design. One such technology resulted in the creation of near-perfect polar patterns. When you look at a polar pattern of Earthworks IM10-B Installation Microphone, the mid-frequencies, high-frequencies and low-frequencies all look very close to a "textbook" polar pattern. In practice this means the polar response of Earthworks IM10-B Installation Microphone is extremely uniform over its operating frequency range; the frequency response at 90 degrees off-axis is very close to the on-axis response. This uniform polar response results in less phase problems and much higher intelligibility at the sides of Earthworks IM10-B Installation Microphone.

Earthworks IM10-B Installation Microphone Features

  • High Definition Microphones for conference rooms and fixed sound installations
  • Near-perfect polar response (uniform frequency response at 0, 45 & 90)
  • Can be mounted in wall, ceiling or conference tables (includes lock nut)
  • High rejections of sounds from the rear of the microphone
  • Very high intelligibility
  • More gain before feedback
  • 30kHz flat frequency response
  • Very easy to position via 10 inch mini-gooseneck
  • 145dB max acoustic input
  • Requires 48V phantom power
  • Comes in an attractive black finish
  • Primary applications include teleconferencing, distance learning, surveillance, boardrooms, government facilities, and ambient room miking

Earthworks IM10-B Installation Microphone Specifications

  • Manufacturer: Earthworks
  • Product: IM10-B Installation Microphone
  • Frequency Response: 30Hz to 30kHz 2dB at 12 inches (30.5cm)
  • Polar Pattern: Cardioid
  • Sensitivity: 10mV/Pa (-40dBV/Pa)
  • Power Requirements: 48V Phantom, 10mA
  • Max Acoustic Input: 145dB SPL
  • Output: XLR (pin 2+)
  • Output Impedance: 100 ohm balanced (50 ohm each pins 2 & 3)
  • Min Output Load: 600 ohm between pins 2 & 3
  • Noise: 22dB SPL equivalent (A weighted)
  • Color: Black
  • Gooseneck: 10 inch (254mm)
  • Weight: 0.28 lbs. (125g)

Earthworks IM10-B Installation Microphone Downloads

Click here to view all Earthworks Products