Home > Monitoring >

Dynaudio BM9S II Active Subwoofer

Dynaudio BM9S II
Dynaudio BM9S II
Alternative Views:

List Price: $1,269.00
Our Price: $949.00

Availability: Usually Ships in 24 Hours
Product Code: 9999-05809


Dynaudio BM9S II Active 10" Subwoofer

The Dynaudio BM9S II Active 10" Subwoofer is an updated design extremely well-suited for that extra punch to the bottom in setups where space is limited.

Dynaudio BM9S II Active 10" Subwoofer Details

The Dynaudio BM 9S II subwoofer is intended to operate with the BM series monitors, more specifically, the Dynaudio BM5 MKIII monitor, where it becomes a very complimentary partner. It is extremely well-suited for that extra punch to the bottom in setups where space is limited and for gaining a perspective of audible frequency content in the sub-harmonic range in tandem with larger nearfields. The BM 9S II delivers a clear, crispy and surprisingly powerful punch when you take its almost diminutive size into account. The BM 9S II will complement stereo and multichannel monitoring equally well and when daisy-chaining of subwoofers is needed, it sports a low level LFE input/output.

For significant control and enhancement of the general performance, the BM 9S II is a closed cabinet type. This creates an internal pressure by which the woofer gains a considerable amount of precision when it comes to the reproduction of low frequent signals. This precision is easily audible and it augments the feeling of reality that the listener experiences.

The BM 9S II is designed according to the strict BM series specifications. With a 10" woofer and 200 Watts of power, and virtually minute dimensions, this sub is tailor-made to take care of even the most comprehensive challenges where space is scarce. Being every bit as versatile as the rest of the BM series, BM 9S II is a very competent partner for smaller stereo and multichannel setups, giving a very powerful system for even the most demanding users across the globe.

The Auto On/Off function, provides a minimized idle energy usage by shutting off after minutes of no input signal. The auto sensing circuit enables BM9S II to automatically come to life when input signal is detected.

The satellite filters that this sub sports, provides high-pass filtering of the monitor source signal allowing 60Hz or 80Hz corner frequencies. This is a huge advantage for the monitor performance, as the satellites do not need to deal with power consuming lower frequencies. This leaves all the satellite power to greatly accelerate performance and precision.

Dynaudio BM9S II Active 10" Subwoofer Features

  • 10" woofer with pure aluminum voice coil. 200W @ 4 ohm
  • Phase adjustment in 0° / 180°; Auto on/off, power LED;
  • Selectable LFE or slave mode
  • Discrete LFE input, slave output for linking
  • Adjustment of low-pass corner frequencies (50-150 hz)
  • Frequency response of 29 Hz to 250 hz
  • SAT/SUB high-pass adjustment: Flat, 60 Hz, 80 Hz

Dynaudio BM9S II Active 10" Subwoofer Specifications

  • System: Precision Subwoofer
  • Frequency Response: 29 Hz to 250 Hz
  • Inputs: LFE/Slave, SAT/SUB, XLR right/left full bandwidth
  • XLR Input impedance: + branch 20 kOhm, ?" branch 10 kOhm
  • Sensitivity: 75 mVRMS to 5 VRMS, adjustable
  • Max. Input voltage: 10 VRMS
  • Outputs: Slave, SAT/SUB, XLR right/left, High-pass filtered
  • XLR Output impedance: 100 Ohm (each branch)
  • XLR Pin-out:
    • 1: 0
    • 2: +
    • 3: ?"
  • Mode selector: LFE, Slave (Phase and volume controls are bypassed in slave mode
  • SAT High-pass: Flat, 60 Hz, 80 Hz
  • SUB Low-pass: 50 Hz to 150 Hz
  • Auto ON/OFF: Automatic ON (LED green) when signal is detected at input Automatic mute (LED red) when no signal is detected for 15 to 20 min.
  • Amplifier power: 200 W, 4 Ohm
  • Power consumption: <16 W Standby, 325 W Max.
  • Woofer: 240 mm/10-inch One piece molded MSP cone (Magnesium Silicate Polymer), 100 mm/4?, Pure aluminum voice coil
  • Weight: 8,8 kg. / 19.4 lbs
  • Dimensions (WxHxL): 290 x 290 x 300 mm / 11.4? x 11.4? x 11.8?

Dynaudio BM9S II Active 10" Subwoofer Applications

  • Post Production
  • Music Recording and Mixing
  • Film Editing (smaller rooms)
  • DVD authoring and Mastering
  • Multichannel Production (Audio or Audio for pictures)
  • Broadcast
  • Edit suites
  • OB vans

Dynaudio BM9S II Active 10" Subwoofer Downloads

Click here to view all Dynaudio products

You may also need...
Mogami Gold TRS to Male XLR Cable (15 Foot) Crane Song AVOCET IIA Stereo Monitor Controller Mogami Gold Studio Microphone Cable (15 Foot) Primacoustic RX7 HF Recoil Stabilizer Monitor Isolation Pad (Flat)
Our Price: $59.95

Our Price: $2,999.00

Our Price: $54.95

Our Price: $99.99

Mogami Gold TRS to Male XLR Cable Crane Song AVOCET Mogami Microphone Cable Primacoustic RX7
Grace Design m905 Monitor Controller IsoAcoustics ISO-L8R200Sub Subwoofer Isolation Stand
Our Price: $3,325.00

Our Price: $59.99

Grace Design m905 IsoAcoustics ISO-L8R200Sub