Home > Live Sound > Signal Processing > Accessories >

  Drawmer SP2120TPC Tamper Proof Cover

Drawmer SP2120TPC
Drawmer SP2120TPC
List Price: $119.00
Our Price: $99.00

Availability: Usually Ships in 24 Hours
Product Code: 9999-11362


Drawmer SP2120TPC Tamper Proof Cover

The Drawmer SP2120TPC Tamper Proof Cover further extends the secure installation of the Drawmer SP2120 by locking the XLR connectors in place on the rear of the unit.

With the The Drawmer SP2120TPC Tamper Proof Cover, Drawmer has gone to great lengths to make the Speaker Protector tamper-proof by incorporating the locking mechanism on the front. However, if the rear of the unit, along with the power amplifier, were reconnected then the protection system would effectively be bypassed. For this reason Drawmer have designed the Speaker Protector Tamper-proof Bracket - trapping the XLRs in place and making it extremely difficult to disconnect them without removing the bracket. This bracket could be specified in order to conform to Local Authority noise abatement regulations.

Installation of the Tamper-proof bracket could not be simpler: After setting up the SP2120 Speaker Protector as described in the manual, with the XLRs in place, simply slide the Tamper-proof Bracket over the rear of the unit, making sure that the protruding cables locate through the gaps on the bracket. Next, screw in to place at the four locating points (arrowed below) using the M3 screws provided. Further protection can be gained by fitting M3 TORX tamperproof screws (See Recommended Accessories, below), to a maximum length of 6mm, though a specialist screwdriver will also be required.

In addition, for extra protection, both the SP2120 and the power amp should be locked in a rack, where access to the rear is very difficult.

Special Note

You should note that the Tamper-proof bracket is only available for SP2120s whos serial number is 0845 or higher (September 2006). On older versions the bracket could be retro- fitted, though this would invalidate any warranty that Drawmer has provided for the SP2120. Alternatively, Drawmer can bring your SP2120 up to current Drawmer specification - please call us at 888-228-4530 or email us: info@frontendaudio.com for further details.

Drawmer SP2120TPC Tamper Proof Cover Includes

  • SP2120TPC Tamper Proof Cover - only

Drawmer SP2120TPC Tamper Proof Cover Recommended Accessories

Drawmer SP2120TPC Tamper Proof Cover Downloads

Click here to view all Drawmer products

You may also need...
Drawmer SP2120 Speaker Protector Protection Raxxess PNTX-B Pin Torx Bit-Star w/ Center Post Raxxess PNTX-50 Pin Torx Security Screws (50/Bag) Raxxess PNTX-100 Pin Torx Security Screws (100/Bag)
Our Price: $799.00

Our Price: $9.84

Our Price: $12.96

Our Price: $24.88

Drawmer SP2120 Raxxess Bit-Star Raxxess PNTX-50 Raxxess PNTX-100