Home > Microphones > Condenser Microphones > Small Diaphragm >

  DPA ST2006A Stereo Microphone Kit

DPA ST2006A
DPA ST2006A
 
List Price: $1,979.95
Our Price: $1,979.95


Availability: Usually Ships in 24 Hours
Product Code: 9999-13865

 

DPA ST2006A Stereo Microphone Kit

DPA ST2006A Stereo Microphone Kit

DPA ST2006A Stereo Microphone Kit Details
The DPA ST2006A is a complete DPA 2006A Stereo Pair with two handpicked omni microphones, selected on sensitivity within ±1.5 dB. As main AB stereo pair the 2006As deliver precise acoustic fingerprint and true tone. Orchestra, acoustic piano, guitar, wind instruments and choirs are among the most evident applications for this high-value-for-money pair.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone and accessory inlays.

DPA ST2006A Stereo Microphone Kit Features
  • Sensitivity selected pair
  • Acoustic authenticity
  • Linear in a large frequency bandwidth
  • PeliTM Case transportation and protection
DPA ST2006A Stereo Microphone Kit Includes
  • Two carefully matched 2006A omni microphones
  • sturdy PeliTM case
  • holders
  • windscreens

DPA 2006-A Twin Diaphragm Omnidirectional Microphone Specifications

  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
  • Frequency range: 20 Hz to 20 kHz
  • Frequency range, ± 2 dB: 50 Hz to 20 kHz with typ. 3 dB soft boost at 14 kHz
  • Sensitivity, nominal, ± 2 dB at 1 kHz: 40 mV/Pa; -28 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 28 dB (max. 30 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 78 dB(A)
  • Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 130 dB SPL peak
  • Minimum load impedance: 2 kohm
  • Dynamic range: Typ. 114 dB
  • Max. SPL, peak before clipping: 141 dB
  • Switchable attenuator: 0 dB / -20 dB
  • Output impedance: < 200 ohm
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR): > 60 dB
  • Power supply (for full specifications): 48 V Phantom power (± 4 V)
  • Current consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color: Matte black
  • Microphone weight: 160 g (5.6 oz)
  • Microphone diameter: 19 mm (0.75 in)
  • Microphone length: 164 mm (6.5 in)
  • Output voltage, RMS: > 5 V
  • Polarity: +V at Pin 2 for positive sound pressure
  • Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
  • Relative Humidity (RH): Up to 90%


You may also need...
DPA UA0836 Stereo Boom with Holders DPA UA0897 Shock Mount DPA UA0837 Stereo Boom DPA DUA0019 Spacer for Stereo Boom
Our Price: $759.95

Add
Our Price: $340.00

Add
Our Price: $569.95

Add
Our Price: $30.00

Add
DPA UA0836 DPA UA0897 DPA UA0837 DPA DUA0019