Home > Microphones > Wireless & Live Sound > Headset Microphones >

  DPA 4066 "Classic" Omnidirectional Headset Microphone

DPA 4066
DPA 4066
Alternative Views:

List Price: $649.95
Our Price: $649.95

Availability: Usually Ships in 24 Hours
Product Code: 9999-13692


Unterminated Connector



DPA 4066 "Classic" Omnidirectional Headset Microphone

DPA 4066 Omnidirectional Headset Microphone

DPA 4066 Omnidirectional Headset Microphone Details
The 4066 is a flexible miniature microphone solution that features very easy and fast adjustment. The headset construction is unique in design, offering both left and right mounting and color change. It is also possible to use the MMB4066 Miniature Microphone Boom, Omnidirectional, separately, in applications where the headset is not needed. The 4066 offers a clean and transparent sound quality with lots of headroom.

Attention has been paid to the humidity problems that often occur in theatrical applications. A double vent protection system, a drop stopper on the microphone boom, together with water resistant materials inside the microphone, makes it more than difficult for the humidity to cause the microphone to fail. The headset surface is matte gold plated and the earhooks are covered with a silicone hose.

The sensitivity is 6 mV/Pa to match the level of the human voice to the general input sensitivity of most wireless transmitters. If powered correctly the microphone will be able to handle sound pressure levels up to 144 dB SPL before clipping occurs.

A wide range of connection adapters makes it possible to use the 4066 with most of the professional wireless systems available plus 48V phantom XLR connection.

***** Note: This microphone comes standard with a MicroDot connection and a MicroDot adapter is required to terminate the mic to your wireless system. The list of adapters can be found at the link below.

DPA 4066 Omnidirectional Headset Microphone Includes

  • Microphone (boom, headband, cable)
  • A high-boost grid
  • A soft-boost grid
  • Five foam windscreens

DPA 4066 Omnidirectional Headset Microphone Specifications

Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser element with vertical diaphragm
Frequency range, ± 2 dB: Soft boost grid: 20 Hz "" 20 kHz, 3 dB soft boost at 8 "" 20 kHz. High boost grid: 20 Hz "" 20 kHz, 10 dB boost at 12 kHz.
Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equiv. noise level ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 68 dB (A)
Total harmonic distortion (THD): < 1 % THD up to 123 dB SPL peak; < 1 % THD up to 120 dB SPL RMS sine
Dynamic range: Typ. 97 dB
Max. SPL, peak before clipping: 144 dB
Output impedance: 30 "" 40 ohm
Cable drive capability: Up to 300 m (984 ft)
Power supply: For wireless systems: Min. 5 V "" max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance.
Color: Black, brown or beige
Microphone weight: 14 g (0.5 oz) incl. cable and MicroDot connector
Microphone diameter: 5.4 mm (0.21 in)
Cable length: 1.2 m (3.9 t)
Cable diameter: 1.6 mm (0.06 in)
Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
Operating temperature range: -10 to 45°C (14 to 113°F)

You may also need...
DPA AHM6000 Replacement Headband Mount for 4066 & 4088 DPA d:screet Slim Microphone DPA MMB4066 Microphone Boom for 4066 DPA DUA6001 Miniature Soft Boost Grids (5 Pieces)
Our Price: $260.00

Our Price: $429.95

Our Price: $490.00

Our Price: $57.00

DPA AHM6000 DPA d:screet Slim DPA MMB4066 DPA DUA6001
DPA Miniature Microphone Windscreen (5-Pack)
Our Price: $31.00

DPA Miniature Windscreens