Home > Microphones > Condenser Microphones > Small Diaphragm >

  DPA 4016 High Voltage 130V Wide Cardioid Microphone

DPA 4016
DPA 4016
 
List Price: $2,429.95
Our Price: $2,429.95


Availability: Usually Ships in 24 Hours
Product Code: 9999-13781

 

DPA 4016 High Voltage 130V Wide Cardioid Microphone

DPA 4016 Wide Cardioid Microphone

DPA 4016 High Voltage 130V Wide Cardioid Microphone Details    
The 4016 wide cardioid microphone is the high voltage (130 V) counterpart to the 4015-TL. The two microphones are acoustically identical, but differ in their sound level handling. Due to the higher voltage supplied for the preamplifier via the DPA HMA5000, the 4016 can handle 168 dB SPL peak before clipping occurs!

It is designed with a linear on-axis frequency response from 40 Hz (±2 dB) to 20 kHz (+3/-2 dB) at 60 cm, with a soft high frequency lift from 10 to 15 kHz of max. 3 dB.

The off-axis characteristics of the 4016 wide cardioid microphone are totally linear, a unique quality when it comes to authentic sound reproduction. Any leakage that occurs from off-axis sound sources is still a faithful reproduction of these sounds, just softly attenuated.

DPA 4016 High Voltage 130V Wide Cardioid Microphone Features

  • clear and detailed sound
  • excellent for grand piano, guitar, marimba, percussion set-ups or as spot mic in a symphony orchestra
  • handles extreme sound pressure levels
DPA 4016 High Voltage 130V Wide Cardioid Microphone Specifications
  • Directional characteristics:     Wide Cardioid
  • Principle of operation:     Pressure gradient
  • Cartridge type:     19 mm (0.75 in) pre-polarized condenser
  • Frequency range, ± 2 dB:     On-axis: 40 Hz to 20 kHz +3/-2 dB in 60 cm distance with a max. 3 dB soft boost at 10 " 15 kHz
  • Sensitivity, nominal, ±2 dB:     12 mV/Pa; -38 dB re 1 V/Pa
  • Equivalent noise level A-weighted:     Typ. 19 dB(A) re. 20 µPa (max. 20 dB(A))
  • Equiv. noise level ITU-R BS.468-4:     Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
  • Total harmonic distortion (THD):     <0.5% up to 110 dB SPL peak, <1% up to 116 dB SPL peak
  • Dynamic range:     Typ. 97 dB
  • Max. SPL, peak before clipping:     With HMA5000: 168 dB SPL peak
  • Output impedance:     Matches HMA5000 input
  • Cable drive capability:     From microphone to HMA5000: Up to 20 m (66 ft). From HMA5000: Up to 300 m (984 ft)
  • Power supply:     130 V via HMA5000
  • Connector:     4-pin modified XLR-M (High Voltage)
  • Weight:     165 g (5.8 oz)
  • Capsule diameter:     19 mm (0.75)
  • Length:     175 mm
  • Operating temperature range:     -40 to +55°C (-40 to 131°F)