Home > Microphones > Condenser Microphones > Small Diaphragm >

  DPA 4007A Omnidirectional Microphone

DPA 4007A
DPA 4007A
 
Alternative Views:


List Price: $2,109.95
Our Price: $2,109.95


Availability: Usually Ships in 24 Hours
Product Code: 9999-13777

 

DPA 4007A Omnidirectional Microphone

DPA 4007A Hi-SPL Omnidirectional Microphone

DPA 4007A Omnidirectional Microphone Details

The High-SPL Recording Microphone DPA 4007A Omnidirectional Microphone is a phantom powered (P48) close miking specialist with an extremely linear on-axis response in an extended frequency range from 10 Hz to 40 kHz (±2 dB). This high-performance condenser omni mic has an unbeatable dynamic range of 124 dB from the noise floor to 1% THD and is capable of handling up to 160 dB SPL peak before clipping occurs, making it suitable for a wide range of applications from AB stereo pair to close miking tasks as well as measurement requirements.

The 4007A has through its total acoustical transparency and ultra-high SPL handling capability gained a reputation as being the first choice for picking up drums, percussion and brass instruments, whenever the natural and non-distorted result is paramount. 4007A is, due to its linear qualities and perfect omnidirectionality, also used as reference microphone in both microphone comparisons and acoustic test equipment. At any time and with no tools necessary it is possible to transform the basic 4007A microphone into a new configuration by combining it with another DPA microphone capsule or preamp.

DPA 4007A Omnidirectional Microphone Features

  • Linear response up to 40 kHz
  • Unbeatable dynamic range
  • Extreme SPL handling up to 160 dB
  • Close miking, main pair recording or measurement use

DPA 4007A Omnidirectional Microphone Specifications

  • Directional characteristics: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 10 Hz - 40 kHz
  • Frequency range, ± 2 dB: 10 Hz - 40 kHz
  • Sensitivity, nominal +/- 2 dB at 250 Hz: 9 mV/Pa; -40 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 24 dB(A) re. 20 µPa (max. 26 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 36 dB (max. 38 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 70 dB(A)
  • Total Harmonic Distortion (THD): < 0.5 % up to 142 dB SPL peak
  • Total Harmonic Distortion (THD): < 1 % up to 148 dB SPL peak
  • Dynamic range: Typ. 124 dB
  • Max. SPL, peak before clipping: 160 dB
  • Switchable attenuator, filters etc.: 0 dB / -20 dB
  • Output impedance: 200 Ω
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedansbalanceret med Active Drive
  • Common Mode Rejection Ratio (CMRR): > 60 dB
  • Power supply: 48 V Phantom power (±- 4 V)
  • Current consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color: Matte black
  • Weight: 163 g (5.7 oz)
  • Microphone diameter: 12 - 19 mm (0.47 - 0.75 in)
  • Capsule diameter: 12 mm (0.47 in)
  • Microphone length: 170 mm (6.7 in)
  • Maximum output voltage: 7 V
  • Polarity: +V at pin 2 for positive sound pressure
  • Temperature range: -40 °C to 50 °C (-40 °F to 122 °F)
  • Relative Humidity (RH): Up to 90%
  • Matching tolerance (frequency response and sensitivity): ± 0.5 dB
  • Phase deviation for kit: < 5°

Click here to view all DPA products