Home > Microphones > Condenser Microphones > Small Diaphragm >

  DPA 4004 High voltage 130V Omnidirectional Microphone

DPA 4004
DPA 4004
 
List Price: $2,429.95
Our Price: $2,429.95


Availability: Usually Ships in 24 Hours
Product Code: 9999-13774

 

DPA 4004 High voltage 130V Omnidirectional Microphone

DPA 4004 High voltage 130V Omnidirectional Microphone

DPA 4004 Omnidirectional Microphone Details
The 4004 is an omnidirectional hi-voltage (130 V) close miking specialist with an extended on-axis frequency response from 10 Hz to 40 kHz (±2 dB).

An ideal measurement mic, the 4004 is a reference condenser microphone specially designed to handle extremely high sound pressure levels - up to 168 dB SPL before clipping occurs.

It has an unbeatable dynamic range of 124 dB from the noise floor to 1% THD and an extended headroom of 20 dB up to clipping level due to the special hi-voltage powering system.

The 4004 is acoustically identical with the reference microphone Type 4007, but differs in the powering system and the fact that the 4004 has a transformerless output.

4004 is totally transparent and is the perfect choice in all close miking recording situations regardless of the sound source.

DPA 4004 Omnidirectional Microphone Features
  • measurement microphone
  • unbeatable dynamic range
  • close miking recording situations regardless of the sound source
  • specially designed to handle extremely high sound pressure levels
DPA 4004 Omnidirectional Microphone Specifications
  • Directional characteristics:  Omnidirectional
  • Principle of operation:  Pressure
  • Cartridge type:  12 mm (0.47 in) pre-polarized condenser
  • Frequency range, ± 2 dB:  10 Hz - 40 kHz
  • Sensitivity, nominal, ±2 dB:  10 mV/Pa; -40dB re. 1V/Pa
  • Equivalent noise level A-weighted:  Typ. 24 dB(A) re. 20 µPa (max. 26 dB(A))
  • Equiv. noise level ITU-R BS.468-4:  Typ. 36 dB (max. 38 dB)
  • S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):  70 dB
  • Total harmonic distortion (THD):  <0.5% up to 142 dB SPL peak, <1% up to 148 dB SPL peak
  • Dynamic range:  Typ. 124 dB
  • Max. SPL, peak before clipping:  168 dB SPL peak (f<4 kHz)
  • Output impedance:  <75 ohm
  • Cable drive capability:  From microphone to HMA5000: Up to 20 m (6 ft) From HMA5000: Up to 300 m (984 ft)
  • Power supply:  130 V through HMA5000
  • Connector:  4-pin modified XLR-M (High Voltage)
  • Weight:  150 g (5.29 oz)
  • Capsule diameter:  12 mm (0.47 in)
  • Microphone length:  165 mm (6.5 in)
  • Operating temperature range:  -40 to +55°C (-40 to 131°F)