 |
 |
 |
|
DBX 376 Tube Channel Strip Details
IT’S TIME TO CHANGE THE CHANNEL! The standard of excellence for channel
strip processors has just been raised once again. From the world leader
in digital signal processing comes the new 376 Tube Channel Processor
with digital output capabilities. dbx® Professional Products has been
paving the way for audio excellence for more than 25 years, and with
the creation of the 376, the drive continues. The 376 has taken the
essential tools needed for channel strip processors and has greatly
added to the feature list, making it an all inclusive toolbox that
offers all of the effects required. With an effect menu list that
includes such standard features as: a tube preamp section, 3-Band
parametric EQ section, Compressor, De-Esser and digital outputs, the
376 is the perfect companion piece for recording and tracking vocals
and mic’d applications in the analog and digital domain. The 376 Tube Channel Strip w/Digital Output is the latest
addition to the Silver Series family. The 376 puts the best of both
worlds into one affordable package by combining the warmth of the
vacuum tube, with the proprietary dbx Type IV® conversion system. The
376 boasts many of the same features as other products in the Silver
Series, such as +48V phantom power, a phase invert switch, and low cut
filtering. In addition, the 376 also offers digital output capabilities
in both AES/EBU, and S/PDIF formats as standard features. The high
impedance, 1/4" instrument input located on the front panel, as well as
the mic/line switch, and 20 dB pad show our dedication to providing
convenience in the studio. The LED meters provide a clear and concise
visual of the signal processing at a glance. The rear panel includes
both mic and line inputs and outputs, word clock sync input and output,
insertion jack and digital outputs. Add selectable sampling rates of
44.1 kHz, 48 kHz, 88.2 kHz, or 96 kHz; selectable dithering and noise
shaping; and separate analog and digital output controls to this
already impressive list of features, and we think you’ll agree that the
376 lives up to the uncompromising standards of dbx Professional
Products. DBX 376 Tube Channel Strip Features
- Tube microphone pre-amp
- 200V tube plate voltage
- Selectable mic/line switch
- +48 Volt phantom power
- 3-Band Parametric EQ
- Compressor
- De-Esser
- Front panel instrument input
- Drive meter LEDs
- Threshold and De-Esser meters
- 8 segment analog or digital meter
- Type IV® conversion system
- Selectable sampling rate (96, 88.2, 48, 44.1kHz)
- 24, 20 and 16 bit wordlengths
- AES/EBU and S/PDIF digital outputs
- Selectable dither and noise-shaping algorithms
- Word clock sync input and output
|
|
|
 |
|
 |
|
