Home > Rack Gear > EQs >

dbx 2031 Graphic Equalizer

DBX 2031
DBX 2031
 
Alternative Views:


List Price: $649.95
Our Price: $429.95


Availability: Usually Ships in 24 Hours
Product Code: 9999-02473

 

dbx 2031 Graphic Equalizer

The dbx 2031 Graphic Equalizer is a single channel 31 band equalizer / limiter with type III noise reduction. Providing useful audio signal processing tools in situations where precise frequency control is required across the audible frequency spectrum, the dbx 2031 offers high performance and excellent reliability.

The dbx 2031 Graphic Equalizer is amazing. One little button. So much effect. dbx® Type III® Noise Reduction is an entirely new concept... virtually instantaneous encode/decode within the circuitry of the box. The dbx started out to build the finest EQs possible, boxes with the heritage and performance to rival their famous 30 Series EQs. And to no one's surprise they came out awfully darn good. (Ask to see the Audio Precision plots compared to the competition.) But then, Roger (dbx chief engineer, a nice guy, as far as engineers go) got the crazy idea of putting this new noise reduction stuff in the box. The dbx listened to it and were amazed. The dbx 2031 Graphic Equalizer's sounded great without it but with it the performance was nothing short of incredible. Check it out yourself and see.

But hey, Roger wasn't about to stop there. PeakPlus® Limiter. Who knows more about limiting than the folks at dbx; nobody... that's who. So when the guys were developing this new series of EQs they wanted something that would be unique to these EQs. That's when Roger got another one of his bright ideas and said "I bet they'll work a lot better if there's a cool limiter built in." Next thing you know, all the guys are in the studio amazed at the new limiter Roger had designed specially for the 20 Series. Once again, hearing is believing... With a threshold range of 0dbu to plus 20dbu, the patent-pending PeakPlus limiter is designed to tame your program material from the subtlest nuances to the rowdiest hits. Also, the four stage LED ladder gives you a great visual indication as to what the limiter is doing.

You used to have to settle for second best in a reasonably priced EQ but not any more. With the new dbx 2031 Graphic Equalizer, you get a great EQ circuit, a graceful yet powerful limiter and the revolutionary new design of the Type III Noise Reduction. Check out the dbx 2031 Graphic Equalizer and you'll see, you get More..!!!

dbx 2031 Graphic Equalizer Features

  • Revolutionary instant encode/decode Type III® Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dB
  • Patent-pending PeakPlus® Limiter threshold range from 0dBu to +24dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signal
  • An extremely high quality EQ, patent-pending Type III Noise Reduciton, and the elegant new PeakPlus Limiter all in one great sounding box
  • Four segment LED bargraph for BOTH Gain Reduction AND Output Level offers the most comprehensive visual feedback available
  • Status LEDs offer visual feedback for all settings on the front panel

dbx 2031 Graphic Equalizer Specifications

  • Input Connectorr: 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
  • Input Type: Electronically balanced/unbalanced, RF filtered
  • Input Impedance: Balanced 40 kOhm, unbalanced 20 kOhm
  • Max Input: >+21dBu balanced or unbalanced
  • CMRR: >40dB, typically >55dB at 1kHz
  • Output Connectors: 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
  • Output Type: Impedance-balanced/unbalanced, RF filtered
  • Output Impedance: Balanced 200 ohm, unbalanced 100 ohm
  • Max Output: >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
  • Bandwidth: 20Hz to 20kHz, +0.5/-1dB
  • Frequency Response: <10Hz to >50kHz, +0.5/-3dB
  • Signal-to-Noise (NR In: +/-6 and +/-15dB ranges): >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
  • Dynamic Range (NR In: +/-6dB and +/-15dB ranges): >120dB, unweighted
  • Signal-to-Noise (NR Out: +/-6dB range): >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth
  • Dynamic Range (NR Out: +/-6dB range): >112dB, unweighted
  • Signal-to-Noise (NR Out: +/-15dB range): >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
  • Dynamic Range (NR Out: +/-15dB range): >108dB, unweighted
  • THD+Noise: <0.04%, 0.02% typical at +4dBu, 1kHz
  • Noise Reduction: Up to 20dB of dynamic broadband noise reduction
  • NR Switch: Activates dbx Type III Noise Reduction
  • Bypass Switch: Bypasses the graphic equalizer section in the signal path
  • Low cut Switch: (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter
  • Range Switch: (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range
  • I/O Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
  • Gain Reduction Meter: 4-LED bar graph (all Red) at 0, 3, 6, and 10dB
  • Indicators: NR Active (Yellow); EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red)
  • Operating Voltage: 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz
  • Power Consumption: 15W
  • Power Connector: IEC receptacle
  • Dimensions: 3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm)
  • Net Weight: 8.5 lbs. (3.9 kg)
  • Shipping Weight: 9.5 lbs. (4.3 kg)

dbx 2031 Graphic Equalizer Includes

  • dbx 2031 Graphic Equalizer Unit
  • AC power cord
  • Printed Operation Manual
  • Warranty Registration Card
  • Four Rack Mount Screws And Washers

dbx 2031 Graphic Equalizer Downloads

Click here to view all dbx products