Home > Microphones > Wireless & Live Sound > Boundary Microphones >

  Crown PZM-6D Footprint Microphone

Crown PZM-6D
Crown PZM-6D
List Price: $519.00
Our Price: $399.00

Availability: Usually Ships in 24 Hours
Product Code: 9999-02987


Crown PZM-6D Footprint Microphone

Crown PZM-6D Footprint Microphone

Crown PZM-6D Footprint Microphone Details

Crown PZM-6D Footprint Microphone is a pressure Zone Microphone, designed for professional recording, sound reinforcement and broadcasting. It has many applications, from miking full orchestras or individual musical instruments to security or teleconferencing. Each mic has a switchable dual frequency response: rising (R) or fl at (F). The "rising" position adds brilliance. This makes it useful wherever a crisp attack is desired, such as on percussion, drums, or piano. The user can get a bright sound without boosting high frequencies on the recording console; the result is lower noise. The "fl at" position provides a smooth, fl at, high-frequency response for natural sound reproduction.

Crown PZM-6D Footprint Microphone has a smaller plate. Its low profi le, unobtrusive appearance is appreciated in conference rooms, as well as on television, film and video productions. When suspended over an orchestra on a clear panel, Crown PZM-6D Footprint Microphone practically disappears. Its miniature, permanently attached 15-foot cable also reduces visual clutter. Crown PZM-6D Footprint Microphone has a 6-foot cable, and can be special-ordered from your Crown dealer. The output of either mic is a male 3-pin XLR-type, balanced and low impedance, which permits long cable runs without hum pickup or high-frequency loss.

Like other Pressure Zone Microphones, Crown PZM-6D Footprint Microphone utilizes the Pressure Recording Process in which a miniature condenser microphone capsule is positioned very close to a sound-refl ecting plate or boundary. The capsule is mounted in the "Pressure Zone" just above the boundary, a region where sound coming directly from the sound source combines in phase with sound reflected off the boundary. The benefits are excellent clarity and "reach," a hemispherical polar pattern, uncolored off-axis response, and a wide smooth frequency response free of phase interference.

Crown PZM-6D Footprint Microphone Features

  • Pressure Zone Microphone design prevents coloration from surface sound refl ections
  • Choice of fl at response or rising high-frequency response
  • PZM-6D is smaller, lighter, and has a permanently attached cable
  • Hemispherical pickup pattern

Crown PZM-6D Footprint Microphone Specifications

  • Manufacturer: Crown
  • Product: PZM-6D Footprint Microphone
  • Type: Pressure Zone Microphone
  • Transducer: Electret condenser
  • Frequency Response(Typical): 20 Hz to 20,000 Hz
  • Polar Pattern: Hemispherical when used on a fl oor, wall or ceiling
  • Impedance: 240 ohms, balanced (recommended load impedance 1000 ohms or greater)
  • Open-Circuit Sensitivity(Typical): 7 mV/Pa* (""43dB re 1 volt/Pa)
  • Power Sensitivity: ""43 dB re 1 mW/Pa*. EIA sensitivity ""135 dBm
  • Signal to Noise Ratio: 74 dB at 94 dB SPL
  • Maximum SPL: 150 dB SPL at 3% THD
  • Operating Voltage: Phantom power, 12-48 volts DC on pins 2 and 3 with respect to pin 1
  • Current Drain: 1.1 mA
  • Cable: Permanently attached 15-foot (4.58-m) black cable with XLRM connector
  • Switch: Frequency-response select switch for rising or flat response
  • Color: Black
  • Net Weight: 6.5 ounces (184 grams)
  • Dimensions: 3 in x 2.5 in. x .375 in. (7.62 cm x 6.35 cm x .95 cm)

Crown PZM-6D Footprint Microphone Downloads

Click here to view all Crown Products