Home > Microphones > Wireless & Live Sound > Boundary Microphones >

  Crown PZM-10 PZM Microphone

Crown PZM-10
Crown PZM-10
 
List Price: $219.00
Our Price: $169.00


Availability: Usually Ships in 24 Hours
Product Code: 9999-02990

 

Crown PZM-10 PZM Microphone

Crown PZM-10 PZM Microphone

Crown PZM-10 PZM Microphone Details

Crown PZM-10 PZM Microphone is a pressure Zone Microphone, designed for security, surveillance, and conference-table use. Since it does not look like microphone, Crown PZM-10 PZM Microphone is inconspicuous. It's tubular housing mounts in a 25/32-inch diameter hole in a ceiling panel, wall or table. Crown PZM-10 PZM Microphone has a mic-level output and a 3-pin XLR-type connector for easy plug-in installation. The mic requires 12 to 48V phantom power. Like other Pressure Zone Microphones, Crown PZM-10 PZM Microphone uses a miniature mic capsule mounted very near a sound-reflecting plate or boundary, in the Pressure Zone. In this zone, direct sound from the sound source combines in phase at all frequencies with refl ected sound off the boundary. The benefi ts are many: 6 dB more sensitivity, 6 dB less noise, a wide smooth frequency response free of phase interference, excellent clarity and "reach," and consistent pickup anywhere around the mic.


Frequencies below the voice range are rolled off to reduce pickup of air conditioning rumble. The high-frequency response is boosted slightly to help articulation. Because of its tailored response and PZM construction, Crown PZM-10 PZM Microphone will pick up conver-sations or other desired sounds with extra clarity and defi nition. The output is balanced, low impedance, which allows long cable runs without hum pickup or high-frequency loss. Its humbucking transformer and steel case prevent hum pickup, even near fluorescent lights.


Crown PZM-10 PZM Microphone Features


  • Pressure Zone Microphone for security and surveillance
  • Clear, intelligible pickup of speech
  • Choice of mic level output
  • Powered by 12-48V phantom power

Crown PZM-10 PZM Microphone Specifications


  • Manufacturer: Crown
  • Product: PZM-10 PZM Microphone
  • Type: Pressure Zone Microphone
  • Transducer: Electret condenser
  • Frequency Response(Typical): 80 Hz to 20,000 Hz
  • Polar Pattern: Hemispherical
  • Impedance: 240 ohms, balanced
  • Open-Circuit Sensitivity(Typical): 2.5 mV/Pa* (""43dB re 1 volt/Pa)
  • Power Sensitivity: ""52 dB re 1 mW/Pa*. EIA sensitivity ""135 dBm
  • Signal to Noise Ratio: 68 dB at 94 dB SPL
  • Maximum SPL: 120 dB SPL at 3% THD
  • Operating Voltage: Phantom power, 12-48 volts DC on pins 2 and 3 with respect to pin 1
  • Current Drain: 400 mA
  • Cable: Use 2-conductor shielded mic cable
  • Material: Steel plate and housing
  • Finish: Off-white. May be painted any color
  • Net Weight: 2.6 ounces (73.6 grams)

Crown PZM-10 PZM Microphone Downloads



Click here to view all Crown Products