Home > Live Sound > Power Amplifiers > Two Channel >

  Crown I-T5000 HD 5000 Watt 2-Channel Power Amplifier

Crown I-T5000 HD
Crown I-T5000 HD
 
Alternative Views:


List Price: $6,137.51
Our Price: $6,137.51


Availability: Usually Ships in 24 Hours
Product Code: 9779

 

Crown I-T5000 HD 5000 Watt 2-Channel Power Amplifier

Crown I-T5000 HD 5000 Watt 2-Channel Power Amplifier

Crown I-T5000 HD 5000 Watt 2-Channel Power Amplifier Details

I-Tech HD features a new user-inspired DSP engine co-developed with BSS called OMNIDRIVEHD. The new LevelMAX limiter suite offers higher SPL out of existing loudspeakers while at the same time better protection and minimal sonic degradation. Harman HiQnet System Architect mirrors the typical browser navigation interface to provide tour sound professionals with an interface to access a host of power configuration and control functions.

Harman HiQnet is the world's first connectivity and control protocol that integrates all product categories in the signal chain for professional audio systems of all types, size, and applications. Harman HiQnet no longer requires the user to manage multiple disparate operating systems or be responsible for programming individual signal processors, speaker controllers, wireless microphone systems, and mixing consoles. HiQnet was developed by engineers from across the Harman Pro Group and is coordinated by the System Development and Integration Group (SDIG), a team of dedicated systems specialists based in Salt Lake City, Utah.

Of course with Crown you have the ability to easily network your amplifiers as well as utilizing Harman HiQnet System Architect. Ultimately Crown gives you the best bang for your buck, when you look at the price and what you get in terms of performance and features.

Crown I-T5000 HD 5000 Watt 2-Channel Power Amplifier Features

  • BSS Omnidrive HD DSP processing with FIR filters
  • LCD screen provides diagnostics and preset selection to ensure fast and easy system and network setup
  • Covered by five patents
  • Fan has true tach feedback for fan fault protection and precise control over thermal performance, so the amp runs longer and harder than the competition
  • Includes SLM (Sweep Load Monitoring) with system-level diagnostics
  • Ultra smooth processing by onboard high-definition BSS Omnidrive HD DSP with 24-bit, 192 kHz Cirrus Logic SHARC A/D and D/A converters. World-class FIR filters
  • Level Max peak voltage and RMS power limiters communicate with each other, resulting in smooth and accurate response, better sound
  • True Ethernet backbone ?"fast, reliable and scalable
  • High common-mode rejection eliminates hum and RFI on input cables
  • 5th-generation patented Class-I (BCA) circuitry couples power efficiently to the load and provides low AC current draw

Crown I-T5000 HD 5000 Watt 2-Channel Power Amplifier Specifications

  • Frequency Response (at 1 watt, 20 Hz - 20 kHz): ±0.25dB.
  • Signal to Noise Ratio below rated full-bandwidth power, A-weighted: > 112 dB.
  • Total Harmonic Distortion (THD) at full rated power: < 0.1%.
  • Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to ?"35 dB: < 0.2%.
  • Damping Factor (20 Hz to 100 Hz at 8 ohms): > 5000.
  • Crosstalk (below rated power, 20 Hz to 1 kHz): > 80 dB.
  • Common Mode Rejection (CMR) (20 Hz to 1 kHz): > 70 dB typical.
  • Latency (analog, digital inputs): 1.13 mS analog, 1.81 mS digital (96 kHz).
  • A/D, D/A Converters: 24-bit 96 kHz Cirrus Logic.
  • Digital Input: AES/EBU, 24-bit, 32-96 kHz Onboard sample-rate converter.
  • Network: Onboard TCP/IQ and HiQnet, compatible with standard 100 Mb Ethernet hardware.
  • DSP: 24-bit conversion with 32-bit, floating-point DSP processing. Has 64 assignable filters with 9 different filter types. Includes all-pass filters, over 2 seconds of delay available per channel, and dual uncorrelated-noise and sine-wave generators.
  • Load Impedance: (Note: Safe with all types of loads) Stereo: 1/2/4/8/16 ohms. Bridge Mono: 2/4/8 ohms.
  • Input Sensitivity (referenced to 8 ohm rated output): Adjustable in 0.1V steps from 1.4V to 7.75V.
  • Required AC Mains: Universal AC input, 100-240VAC, 50/60 Hz (±15%). Maximum AC mains voltage 277VAC.
  • AC Line Connector: Five cordsets supplied with amplifier (USA, UK, European, Australia, India).

Click here to view all Crown products