Home > Live Sound > Power Amplifiers > Multi Channel >

  Crown DCi8 300N Network Power Amplifier

Crown DCi8 300N
Crown DCi8 300N
 
List Price: $5,087.50
Our Price: $5,087.50


Availability: Usually Ships in 24 Hours
Product Code: 9999-14351

 

Crown DCi8 300N Network Power Amplifier

Crown DCi8 300N Network Power Amplifier

Crown DCi8 300N Network Power Amplifier Details

Crown DCi8 300N Network Power Amplifier is a high performance installation amplifier based on the proprietary DriveCore technology. It is designed, engineered and manufactured to the industry"?s highest quality standards, and provides system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, Crown DCi8 300N Network Power Amplifier continues the unbroken Crown tradition of leadership in professional and commercial power amplifier technology. Crown DCi8 300N Network Power Amplifier features DriveCore which is a Crown exclusive that combines hundreds of parts into one chip the size of a your fingertip, resulting in more efficiencies and unsurpassed reliability. DriveCoreâ"¢ Technology seamlessly integrates the amplifier drive stage into the power output stage fusing everything into a chip the size of a dime. The foundational DriveCoreâ"¢ circuitry is based on breakthroughs by Crown's own Gerald Stanley with five patents applying to the advanced feedback, modulation and output stage technologies. DriveCore's front-end drive circuits leverage the inherent efficiency of Class D output stages while also maintaining superb sonic characteristics. The end result is an ultra-efficient one-piece audio amplifier circuit that exhibits the exemplary audio quality of a highly evolved Class AB design.


Crown DCi8 300N Network Power Amplifier Features


  • With digital audio transport via HARMAN"?s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage "" at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input
  • Better monitoring, control and audio manipulation with the HiQnetâ"¢ protocol that"?s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.
  • GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.
  • DSP capabilities include the following: LevelMAX Limiters, Input/Output EQ, Delay, Matrix Mixer, and Speaker Line Monitoring
  • Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

Crown DCi8 300N Network Power Amplifier Specifications


  • Product: DCi8 300N Network Power Amplifier
  • Model: DCi8 300N
  • Frequency Response: ±0.25 dB (8 Ohms, 20 Hz - 20kHz)
  • BLU Link Signal to Noise Ratio: >108 dB (ref. rated power, 8 Ohms, 20 Hz - 20 kHz)
  • Analog Input Signal to Noise Ratio: >104 dB (ref. rated power, 8 Ohms, 20 Hz - 20 kHz)
  • Total Harmonic Distortion: 0.35% (at full rated power, 20Hz - 20kHz)
  • Voltage Gain: 34 dB
  • Damping Factor: >1000 (20 Hz to 100 Hz)
  • Input Impedance: 10 kOhms, 5 kOhms (nominal balanced, unbalanced)
  • Maximum Input Level: +20dBu (before compression) & +26dBu (before clipping)
  • Load Impedance: 2 - 16 Ohms; 70Vrms and 100Vrms (Stereo/Dual Mode) & 4 - 16 Ohms; 140Vrms and 200Vrms (Bridge Mono)
  • Cooling: Continuously variable speed forced air, front to back airflow
  • Maximum Fan Noise: 47 dBA SPL at 1M
  • Required AC Mains: 100V - 240V ~50/60Hz (±10%)
  • IEC Power Connector: 15A IEC
  • Width: 19 in. (48.3cm)
  • Height: 3.5 in. (8.75cm)
  • Depth: 14.25 in (36.cm)
  • Weight: 23.5 lbs (10.66kg)

Crown DCi8 300N Network Power Amplifier Downloads



Click here to view all Crown Products