Home > Microphones > Ribbon Microphones >

  Cascade X-15 Stereo Short Ribbon Microphone

Cascade X-15 Stereo
Cascade X-15 Stereo
 
Alternative Views:


List Price: $449.00
Our Price: $449.00


Availability: Usually Ships in 24 Hours
Product Code: 9999-13514

Transformer

  

 
 

Cascade X-15 Stereo Short Ribbon Microphone

Cascade X-15 Stereo Short Ribbon Microphone

Cascade X-15 Stereo Short Ribbon Microphone Details

The Cascade X-15 Stereo Short Ribbon Microphone houses two separate matched ribbon motors that are positioned one above the other. The elements are offset 90 degrees and are configured in the Blumlein setup. Stereo separation is superb and off-axis coloration is minimal. Add in the excellent sensitivity and frequency response range the X-15 is ready for the big leagues. The fit and finish are of top quality and includes a premium suspension shockmount, thick padded vinyl pouch and an upgraded aluminum case. A 5-pin cable is included, the cable connects to a metal splitter box where two separate XLR connectors give access the to upper and lower ribbon motors.

Unlike most ribbon motors designed today with an offset ribbon element the new Cascade X-15 houses two hand-tuned ribbon elements that incorporate the legendary symmetrical ribbon design. This design offers a true figure 8 pattern. The corrugated aluminum membrane itself is positioned in the center from front to back, thus producing a balanced audio input signal to both sides of the ribbon assembly.

Cascade X-15 Stereo Short Ribbon Microphone Specifications

  • Type: Ribbon (velocity) Microphone
  • Ribbon type & Dimensions: 99% Pure aluminum, 2.5 micron, 1 3/4" (L) X 3/16" (W)
  • Polar pattern: Figure 8 Symmetrical design
  • Sensitivity: -51.7 dB +/- 2dB (2.6 mV/Pa)
  • Output Impedance: <=200 Ohms
  • Recommended load impedance: >1000 Ohms
  • Max.SPL (1% THD @1000 Hz): 135 dB
  • Connector: Heavy gauge 5-Pin male XLR
  • Size: Diameter: 1 1/4" (O.D. grill), overall length 9 1/2", 1" (O.D. body)

Cascade X-15 Stereo Short Ribbon Microphone Includes

  • X-15 Stereo Ribbon Microphone
  • Aluminum case
  • Premium suspension shockmount
  • Thick padded vinyl pouch
  • Wind filter
  • 20ft. 5-Pin XLR cable
  • Splitter cable for left right channels
  • Micro-fiber cleaning cloth
  • Specifications and typical measurement report

Cascade X-15 Stereo Short Ribbon Microphone Downloads

Click here to view all Cascade products


Average Customer Review 2 of 5 Total Reviews: 1 | Write a review!

  0 of 0 people found the following review helpful:
 
Poor Build - Uneven Output March 25, 2016
Reviewer: Stephen Lawson from Minneapolis, MN United States  
The are build issues with this mic. The top cap just fell off as I took it out of the case. I find the output uneven for L & R channels - HOWEVER - when I did get them to be level,  I liked the sound image very much. I used it as a room mic for a live drum kit in a project studio. I am looking into the Sontronic or Avantone for a new stereo mic.

Was this review helpful to you?