Home > Rack Gear > Effects > Enhancers >

BBE 382i SW Sonic Maximizer w/ Subwoofer Output

BBE 382i SW
BBE 382i SW
 
Alternative Views:


List Price: $315.00
Our Price: $219.99


Availability: Usually Ships in 24 Hours
Product Code: 9999-10098

 

BBE 382i SW Sonic Maximizer w/ Subwoofer Output

The BBE 382i SW Sonic Maximizer w/ Subwoofer Output is a Sonic Maximizer and sub-woofer filter network combined into a single rack space device for use in -10dBu unbalanced level applications.

The BBE 382i SW Sonic Maximizer features two separate channels that share the same front panel Lo Contour control and Process control for ganged-stereo operation. A single function button switches the BBE process on or off in both channels, which is useful for comparing the processed sound to the unprocessed sound. An LED next to the function button glows green when the BBE process is on and red when the process is off. The Lo Contour control is for adjusting the level of phase corrected low frequencies in the program material. The Process control is for adjusting the level of phase corrected high frequencies in the program material.

The SUB section of BBE 382i SW Sonic Maximizer, consists of a FREQUENCY control and a LEVEL control. The phase corrected low frequency information from both channels is summed together and directed through an 18dB/octave filter network. The SUB FREQUENCY control adjusts this filter and has a selectable range from 30Hz to 120Hz. By simply adjusting the Frequency control you can set the filter’s frequency point of the Sub-woofer circuit. For example, if you set the Frequency control to 40Hz - then only the information below 40Hz will be sent to the Sub-woofer Output jack.

BBE 382i SW Sonic Maximizer w/ Subwoofer Output Features

  • A full-function Sonic Maximizer
  • +20dB of output headroom
  • Unbalanced ¼" RCA I/Os
  • 108dB signal to noise ratio

BBE 382i SW Sonic Maximizer w/ Subwoofer Output Specifications

  • Frequency Response: process mode; Program controlled, bypass mode; 5Hz to 30kHz +/-0.5dBu, -10dBu input
  • Total Harmonic Distortion: In process mode; less than 0.1% at -10dBu input, 20-20kHz
  • Maximum Output: +20dBu (may vary due to control settings)
  • Input Impedance: 50k Ohms, unbalanced 1/4” phone jack or RCA jack
  • Output Impedance: 1k Ohms, unbalanced 1/4” phone jack or RCA jack
  • Sensitivity: -45dBu for maximum process
  • Maximum Process: +12dBu boost at 5kHz, -10dBu input
  • Lo Contour: +12dBu boost at 50Hz, -10dBu input
  • Sub Out: 0-6dB of gain,18dB/octave filter, selectable range from 30Hz to 120Hz, 1k Ohms, unbalanced 1/4” phone jack or RCA jack
  • Power Requirements:
    • U.S., Canada & Japan Models: 120VAC, 50/60Hz, 8 Watts
    • Standard Model: 220VAC, 50/60Hz, 8 Watts
  • Fuse: Replace with 250VAC, 200mA fastblow type fuse
  • Dimensions: (W x D x H) 19” x 5.5” x 1.7”
  • Shipping Weight: 6.5 lbs.

BBE 382i SW Sonic Maximizer w/ Subwoofer Output Applications

  • DJ sound reinforcement
  • PA sound reinforcement

BBE 382i SW Sonic Maximizer w/ Subwoofer Output Includes

  • BBE 382i SW Sonic Maximizer Unit
  • Printed User Manual
  • 5 Year Warranty

BBE 382i SW Sonic Maximizer w/ Subwoofer Output Downloads

Click here to view all BBE products