Audix MICRO-D Details
The Audix MICRO-D is a pre-polarized condenser microphone designed for many applications including drums, percussion, amplified cabinets, speech, vocals and acoustic instruments. Used in conjunction with 3 different types of specialized clips and 2 different types of interchangeable capsules the Audix MICRO-D becomes a modular sytem that can fulfill a wide variety of creative needs. With a smooth uniform response over a frequency range of 40 Hz –20 kHz, the Audix MICRO-D is lightweight, compact, and extremely easy to use. Housed in an aluminum ring and isolated by means of a rubber shock mount system, the Audix Micro-D has a hypercardioid pick-up pattern and is capable of handling sound pressure levels up to 140 dB. The Audix MICRO-D operates on phantom power of 9–52 Volts and is supplied with a phantom power adapter, integral Dvice clamp, cable, windscreen, and carrying pouch. Low noise electronic circuitry and balanced low impedance output allow for interference free performance even with long cable runs.

Audix MICRO-D Specifications

• Transducer Type: Condenser (pre-polarized)
• Frequency Response: 40 Hz - 20 kHz
• Polar Pattern: Hypercardioid
• Output Impedance: 250 Ohms
• Open Circuit Sensitivity: 5 mV (ref 1k @ 1 Pascal)
• Equivalent Noise Level: 24 dB (A weighted)
• Signal to Noise Ratio: 70 dB (ref 1k @ 1 Pascal)
• Power Requirements: 9 - 52v phantom
• Maximum SPL: 140 dB
• Cable/Connector: 3 pin goldplated male XLR
• Polarity: Positive voltage on pin 2 relative to pin 3 of output XLR connector
• Housing: Capsule housing is brass; Protective ring is aluminum
• Weight: 2 oz / 57 grams
• Finish: Black E-coat

Audix MICRO-D Features

• Lightweight, compact, low profile
• Simple to set-up and use
• Can be used to mic multiple drums at one time
• Fits into tight spaces (between drums, beneath cymbals)

Audix MICRO-D Applications

• Drums and percussion
• Orchestral zone miking
• Vocal zone miking
• Guitar and Bass cabinets
• Cymbals
• Saxophone, Brass
• Acoustic instruments