| Audio Technica ATM75c
With a pivot-mounted flexible mic boom that descends from either the left or right side, the ATM75C delivers professional-quality vocal pickup with hands-free operation. The microphone’s low-visibility headband provides a stable, comfortable fit; its belt-mounted power module operates on either battery or phantom power.
Features
- Professional-quality vocal pickup with hands-free operation
- Low-visibility headband provides stable, comfortable fit
- Pivot-mounted flexible mic boom descends from left or right side
- Belt-mounted power module operates on battery or phantom power
- Cardioid polar pattern improves isolation of desired sound source
Specifications
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 100-13,000 Hz
- Low Frequency Roll-Off: 80Hz, 18dB/octave
- Open Circuit Sensitivity (Phantom/Battery): -51dB (2.8 mV)/-53dB (2.2 mV) re 1V at 1 Pa
- Impedance (Phantom/Battery): 200 ohms/270 ohms
- Maximum Input Sound Level (Phantom/Battery): 132 dB/121 dB SPL, 1kHz at 1% T.H.D.
- Dynamic Range, Typical (Phantom/Battery): 96dB/85dB, 1kHz at Max SPL
- Signal-to-Noise Ratio: 58dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 2 mA typical
- Battery Type: 1.5 AA/UM3
- Battery Current/Life: 0.4 mA/1200 hours typical (alkaline)
- Switch: Off, on-flat, on-roll-off
- Weight: 2.1 oz
- Dimensions, Headset: 4.72" nominal at widest point, 3.17" flexible boom
- Dimensions, Microphone: 0.80" diameter
- Output Connector (power module): Integral 3-pin XLRM-type
- Cable: 55", Unterminated
-
Accessories Furnished: AT8439 clothing clip, AT8139L large windscreen, AT8139S small windscreen, battery
Click Here to view all Audio Technica products |
