Audio Technica AT898 Subminiature Unidirectional Condenser Microphone

FEATURES:

� Maximum intelligibility and clean,
� accurate reproduction for lecturers, stage and television talent, and houses of worship
� Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility
� Operates on battery or phantom power
� Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, interchangeable single and double mic holders
Accessories available separately
9.8' (3.0 m) cable permanently attached to mic, TA3F connector at power module
� Also available as:
� AT898c -- less power module; 55" (1.4 m) cable, unterminated
� AT898cL4 -- less power module; 55" (1.4 m) cable terminated for Sennheiser wireless systems using Lemo connector
� AT898cT4 -- less power module; 55" (1.4 m) cable terminated with TA4F connector for Shure wireless systems
� AT898cT5 -- less power module; 55" (1.4 m) cable terminated with TA5F connector for ATW-U101 and Lectrosonics wireless systems
� AT898cW -- less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak� wireless systems

SPECIFICATIONS:

� Element: Condenser
� Polar Pattern: Cardioid
� Frequency Response: 200 - 15,000 Hz
� Open Circuit:
PHANTOM: -43 dB (7.0 mV) re 1V at 1 Pa
BATTERY: -46 dB (5.0 mV) re 1V at 1 Pa
� Impedance:
PHANTOM: 200 ohms
BATTERY: 250 ohms
� Maximum Input Sound Level:
� PHANTOM: 131 dB SPL, 1 kHz at 1% T.H.D.
� BATTERY: 115 dB SPL, 1 kHz at 1% T.H.D.
� Signal to Noise Ratio: 63 dB, 1 kHz at 1 Pa
� Dynamic Range (Typical):
� PHANTOM: 100 dB, 1 kHz at Max. SPL
� BATTERY: 84 dB, 1 kHz at Max. SPL
� Phantom Power Requirements: 11-52V, 2 mA typical
� Battery Type: 1.5V AA/UM3
� Battery Current/Life: 0.4 mA/1200 hours typical
� Sensitivity Switch: Flat/Roll-off
� Low Frequency Roll-off: 80 Hz, 12 dB per octave
� Weight: 0.03 oz (0.9 g)
� Power Module: In-line
� Output Connector: XLRM-type (power module)