Audio Technica AT4073a Line + Gradient Capacitor Microphone

Shop by Category

(Your shopping cart is empty)

Home > Microphones > Sound Reinforcement >

Audio Technica AT4073a Line + Gradient Capacitor Microphone

Audio Technica AT4073a

List Price: $999.00
Our Price: $879.00
You Save $120.00!

Availability: Usually Ships in 24 Hours
Product Code: 1222

Description

Audio Technica AT4073a

The AT4073a sets new standards in small size and light weight. With an overall length of just 9.13� and weight of just 4.0 oz, the mic adds virtually no heft to the end of a fish pole or the top of a minicam. Through the use of an advanced, propriety Audio-Technica design, the interference tube of the AT4073a provides a narrow acceptance angle that would require a tube 50 percent longer using conventional technology. Audio-Technica has pioneered a unique interference tube design in the AT4071a and AT4073a shotgun mics that provides the same directivity as mics up to 50 percent longer.

Features

Designed for critical long-distance pickup inbroadcasting, film/TV production and theater sound reinforcement applications
Direct-coupled, balanced output ensures a clean signaleven in high-output conditions
Exclusive acoustic design provides same directivity asmics up to 50% longer
Switchable 150 Hz hi-pass filter
Rugged housing made of lightweight structural-grade aluminum alloy

Specifications

Element: Externally polarized (DC bias) condenser
Polar Pattern: Line + Gradient
Frequency Response: 30-20,000 Hz
Open Circuit Sensitivity: -23 dB (70.8 mV), +/-1 dB re1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 126 dB SPL, 1 kHz at 1%T.H.D.
Noise: 14 dB SPL
Signal to Noise Ratio: 80 dB, 1 kHz at 1 Pa
Dynamic Range (Typical): 112 dB, 1 kHz at Max. SPL
Phantom Power Requirements: 11-52V, 3.2 mA typical
Switch: Flat/roll-off
Low Frequency Roll-off: 150 Hz, 12 dB per octave
Weight: 4.0 oz (114 g)
Dimensions: 9.13" long, 0.83 diameter
Output Connector: Integral 3-pin XLRM-type
Accessories Furnished: AT8405 stand clamp 5/8"-27 threaded stands; AT8134 windscreen; protective carrying case