| Audio Technica AT3032 Details
The low-profile Audio Technica AT3032 omnidirectional condenser recording mic is outstanding for piano, acoustic guitar, and other acoustic instruments. Known for its flat, extended frequency response and wide dynamic range, the Audio Technica AT3032 handles high SPLs with ease. Its low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer. Its low self-noise (16 dB SPL) is perfectly suited for the most sophisticated recording equipment.
Audio Technica AT3032 Specifications
- ELEMENT: Fixed-charge back plate permanently polarized condenser
- POLAR PATTERN: Omnidirectional
- FREQUENCY RESPONSE: 30-20,000 Hz
- LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
- OPEN CIRCUIT SENSITIVITY: –34 dB (19.9 mV) re 1V at 1 Pa*
- IMPEDANCE: 250 ohms
- MAXIMUM INPUT SOUND LEVEL: 148 dB SPL, 1 kHz at 1%T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
- NOISE: 16 dB SPL
- DYNAMIC RANGE (typical): 132 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO: 78 dB, 1 kHz at 1 Pa*
- PHANTOM POWER REQUIREMENTS: 11-52V DC, 3 mA typical
- SWITCHES: Flat, roll-off; 10 dB pad (nominal)
- WEIGHT (less accessories): 4.1 oz (116 g)
- DIMENSIONS: 5.67" (144.0 mm) long, 0.83" (21.0 mm) maximum body diameter
- OUTPUT CONNECTOR: Integral 3-pin XLRM-type
- ACCESSORIES FURNISHED: AT8405 stand clamp for 5/8"-27 threaded stands; AT8159 foam windscreen; soft protective pouch
Audio Technica AT3032 Features
- Outstanding performance and versatility
- High max SPL and wide dynamic range
- Omnidirectional polar pattern preserves “sound” of the recording location, delivers flat response and freedom from proximity effect
- Low self-noise (16 dB SPL) – perfectly suited for today's most sophisticated digital recording equipment
- Flat, extended frequency response
- Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad
Other Links
AT3032 Specification Sheet
30 Series Brochure |
