| Audio Technica AT3031 Details
The studio-quality Audio Technica AT3031, a low-profile cardioid condenser microphone from Audio-Technica’s renowned 30 Series, is known for a flat, extended frequency response, high maximum SPL and wide dynamic range. Its low self-noise (16 dB SPL) is perfectly suited for the most sophisticated recording equipment. Its low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer.
Audio Technica AT3031 Specifications
- ELEMENT: Fixed-charge back plate permanently polarized condenser
- POLAR PATTERN: Cardioid
- FREQUENCY RESPONSE: 30-20,000 Hz
- LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
- OPEN CIRCUIT SENSITIVITY: –34 dB (19.9 mV) re 1V at 1 Pa
- IMPEDANCE: 250 ohms
- MAXIMUM INPUT SOUND LEVEL: 148 dB SPL, 1 kHz at 1%T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
- NOISE: 16 dB SPL
- DYNAMIC RANGE (typical): 132 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO: 78 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS: 11-52V DC, 3 mA typical
- SWITCHES: Flat, roll-off; 10 dB pad (nominal)
- WEIGHT (less accessories): 4.0 oz (112 g)
- DIMENSIONS: 5.67" (144.0 mm) long, 0.83" (21.0 mm) maximum body diameter
- OUTPUT CONNECTOR: Integral 3-pin XLRM-type
- ACCESSORIES FURNISHED: AT8405 stand clamp for 5/8"-27 threaded stands; AT8159 foam windscreen; soft protective pouch
Audio Technica AT3031 Features
- Outstanding performance and versatility
- High max SPL and wide dynamic range
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Low self-noise (16 dB SPL) – perfectly suited for today's most sophisticated digital recording equipment
- Flat, extended frequency response
- Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad
Other Links
AT3031 Specification Sheet
30 Series Brochure |
