• Wide-range condenser element with low-mass diaphragm for superior performance
• Self-contained electronics eliminate need for external power modules
• Flat, smooth frequency response
• Quiet, fixed-placement, long-life gooseneck
• Direct mounts to any 5/8"-27 stand, or to included threaded mounting stud
• 9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector
• Overall length of 12.40" (315.0 mm)
• Also available in a 15.79" (401.0 mm)-long version as PRO 47TL

Specifications:

• ELEMENT:Fixed-charge back plate, permanently polarized condenser
• POLAR PATTERN:Cardioid
• FREQUENCY RESPONSE:70-16,000 Hz
• OPEN CIRCUIT SENSITIVITY:-37 dB (14.1 mV) re 1V at 1 Pa
• IMPEDANCE: 100 ohms
• MAXIMUM INPUT SOUND LEVEL:134 dB SPL, 1 kHz at 1% T.H.D.
• DYNAMIC RANGE (typical):106 dB, 1 kHz at Max SPL
• SIGNAL-TO-NOISE RATIO:66 dB, 1 kHz at 1 Pa
• PHANTOM POWER REQUIREMENTS:9-52V DC, 2 mA typical
• WEIGHT:2.2 oz (63 g)
• DIMENSIONS: 12.40" (315.0 mm) long, 0.47" (12.0 mm) head diameter
• OUTPUT CONNECTOR:3-pin XLRM-type on cable
• CABLE: 9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector
• ACCESSORIES FURNISHED:AT8146 windscreen; AT8425 5/8"-27 threaded mounting stud
• AUDIO-TECHNICA CASE STYLE:M22

Click Here to view all Audio Technica products