Home > Monitoring > Headphones > In-Ear >

  Audio Technica M3L Wireless In-Ear Monitor System

Audio Technica M3L
Audio Technica M3L
 
List Price: $1,099.00
Our Price: $799.00


Availability: Usually Ships in 24 Hours
Product Code: 9999-04501

 

Audio Technica M3L Wireless In-Ear Monitor System

Audio Technica M3L Wireless In-Ear Monitor System

Audio Technica M3L Wireless In-Ear Monitor System Details

Audio Technica M3L Wireless In-Ear Monitor System offers a full range of professional in-ear monitoring features, with a choice of 1321 UHF channels and easy-to-read LCD information displays on both transmitter and receiver for setting preferences. Audio Technica M3L Wireless In-Ear Monitor System is the stereo monitor system that is equipped with Audio-Technica"?s versatile Personal Mix Control, which allows volume and mix control of two independent signals on stage, via controls on the M3R stereo body-pack receiver. While up to 16 complete Audio Technica M3L Wireless In-Ear Monitor Systems may be used simultaneously, any number of M3R stereo receivers can operate on the same frequency with a single M3T stereo transmitter. The M3T Stereo Transmitter is equipped with two XLR/" combo input connectors into which users can connect line-level inputs (from a mixing console, for example). The M3T also offers a headphone output that allows you to monitor transmitter input signals directly.


Audio Technica M3L Wireless In-Ear Monitor System Features


  • High-fidelity sound with clean, articulate mix allows performers to hear themselves clearly at lower volume
  • 1321 selectable UHF channels with automatic frequency scanning
  • Up to 16 simultaneous systems per frequency band
  • Three receiver modes: Personal Mix, stereo, and mono
  • Personal Mix Control allows volume and mix control of two independent signals at the receiver
  • LCD information display offers step-through menus for setting preferences
  • XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation
  • Adjustable squelch eliminates annoying static
  • Pilot tone protects against RF interference when transmitter is turned off
  • Multi-level limiter (defeatable) helps protect hearing from sudden peaks
  • Portable system is quick to load and set up
  • Reduces on-stage audio clutter for better overall mix and less feedback
  • Use any number of Stereo Receivers (with individual mixes) on the same frequency
  • Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation
  • Personal fit with 3 sizes of rubber eartips plus ear-conforming foam tips
  • Selectable auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input

Audio Technica M3L Wireless In-Ear Monitor System Specifications


  • Manufacturer: Audio Technica
  • Product: M3L Wireless In-Ear Monitor System
  • Operating Frequencies: Band L: 575.000 to 608.000 MHz, 1321 frequencies
  • Minimum Frequency Step: 25kHz
  • Modulation Mode: FM stereo
  • Maximum Deviation: 40 kHz
  • Dynamic Range: 90 dB (typical), A-weighted
  • Total Harmonic Distortion: <1% at (1 kHz, 20 kHz Deviation)
  • Operating Range: 100 m (300'), typical
  • Operating Temperature Range: -5 C (23 F) to +50 C (122 F)
  • Frequency Response: 60 Hz to 13 kHz (+/- 3 dB)
  • Simultaneous Use: 16 channels per band (maximum recommended)

M3R Stereo Receiver

  • Receiving System: Double conversion superheterodyne
  • RF Sensitivity: 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
  • Headphone Output Connector: 3.5 mm TRS stereo phone jack
  • Headphone Output Power: 65 mW (at 32 ohms)
  • Antenna Input: SMA-type, 50 ohms
  • Aux Input Connector: 3.5 mm TRS stereo phone jack
  • Batteries: 2 x 1.5V AA (not included)
  • Battery Life: 8 hours (alkaline)
  • Dimensions: 70.0 mm (2.76") W x 25.0 mm (0.98") D x 110.0 mm (4.33") H
  • Net Weight: 133 g (4.7 oz), without batteries
  • Accessories Included: EP3 earphone; flexible antenna

M3T Stereo Transmitter

  • RF Power Output: 10 mW/50 mW (switchable), 50 ohms Limited to 10 mW within 863 MHz to 865 MHz
  • Input Connections: XLRF-type/6.3 mm stereo (1/4") combination connector
  • Maximum Input Level: XLRF-type/6.3 mm stereo, (1/4") balanced: +26 dBu, 6.3 mm (1/4") mono, unbalanced: +26 dBu
  • Loop Output Connector: XLRM-type connector
  • Power Requirement: 12-18V DC, 600 mA
  • Headphone Output Connector: 6.3 mm (1/4") TRS stereo phone jack
  • Headphone Output Power: 120 mW at 32 ohms
  • Antenna Connector: BNC, 50 ohms
  • Dimensions: 210.0 mm (8.30") W x 132.0 mm (5.20") D x 44.0 mm (1.70") H
  • Net Weight: 930 g (32.8 oz), without accessories
  • Accessories Included: AC adapter (country dependant); rack mount adapters; flexible antenna

Audio Technica M3L Wireless In-Ear Monitor System Downloads



Click here to view all Audio Technica Products