Home > Microphones > Wireless >

  Audio Technica ATW-1811D Lavalier Camera Mount Wireless System

Audio Technica ATW-1811D
Audio Technica ATW-1811D
 
List Price: $795.00
Our Price: $549.00
FEA Savings: $246.00
 
 


Availability: Usually Ships in 24 Hours
Product Code: 9999-02009

  
 

Audio Technica ATW-1811D Lavalier Camera Mount Wireless System Details

With UHF reception (996 frequencies user-selectable in 25 kHz steps), Audio-Technica’s new 1800 Series camera-mount wireless microphone systems provide extremely flexible, professional and easy-to-use portable wireless solutions. The 1800 Series is available in dual-channel and single-channel systems.

For simultaneous operation of two microphones, dual-channel 1800 wireless systems include the ATW-R1820 dual receiver with two completely independent receiver channels in a single unit. Dual balanced outputs enable signals to be mixed, or independently assigned to each output. Independent audio level controls provide flexible audio mixing and monitoring possibilities.

For those using a single microphone, the single-channel 1800 Series systems include the ATW-R1810 single-channel receiver.

1800 Series wireless systems come equipped with a choice of plug-on and body-pack transmitters. The ATW-T1801 UniPak® body-pack transmitters feature a professional locking 4-pin connector compatible with all Audio-Technica Wireless Essentials® microphones. The ATW-T1802 plug-on transmitters feature a locking XLR connector for adapting dynamic and condenser microphones. Both transmitters offer selectable high and low transmission modes to conserve battery life/maximize power.

Additional 1800 Series features include automatic frequency scanning, Tone Lock™ squelch, back-lit LCD, soft-touch buttons, headphone monitor output with independent level control, and durable metal construction.

Audio Technica ATW-1811D Lavalier Camera Mount Wireless System Features

  • Two completely independent receiver channels in a single unit, for simultaneous operation of two microphones (dual-channel systems)
  • Compact receiver is easy to mount on a camera
  • UHF reception with 996 frequencies selectable in 25 kHz steps
  • Automatic frequency scanning for easy selection of open channels
  • Tone Lock™ squelch system eliminates interference when transmitter is off
  • Two independent balanced outputs (dual-channel systems)
  • Headphone monitor output with independent level control
  • Battery fuel-level indicators on transmitters and receiver
  • Soft-touch controls for easy frequency selection
  • True Diversity operation for resistance to multi-path interference and dropouts
  • LCD frequency and battery status display with backlight
  • Antenna and AF Peak LED indicators
  • Dual-channel receiver can operate in single-receiver mode to extend battery life when only one audio channel is in use (dual-channel systems)
  • Transmitters operate in low or high transmission modes to conserve battery life/maximize power
  • Easy, user-friendly operation
  • Clear, natural sound quality
  • Powered by AA batteries
  • System components of the 1800 Series and 3000 Series Wireless Systems can be used interchangeably

Audio Technica ATW-1811D Lavalier Camera Mount Wireless System Specifications

  • Operating Frequencies: UHF Band C: 541.500 to 566.375 MHz
  • UHF Band D: 655.500 to 680.375 MHz
  • Number of Channels: 996 total per band
  • Frequency Stability: ±0.005%, Phase Lock Loop frequency control
  • Minimum Frequency Step: 25 kHz
  • Modulation Mode: FM
  • Normal Deviation: ±10 kHz
  • Operating Range: 100 m (300') typical
  • Operating Temperature Range: 23° F (- 5° C) to 113° F (45° C)
  • Frequency Response: 70 Hz to 15 kHz

Audio Technica ATW-1811D Lavalier Camera Mount Wireless System Receiver Specifications

  • Receiving System: Dual independent RF sections, automatic-switching diversity
  • Image Rejection: >50 dB typical
  • Signal-to-noise Ratio: 104 dB at 30 kHz deviation (A-weighted), maximum modulation 37 kHz
  • Total Harmonic Distortion: <1% (±10 kHz deviation at 1 kHz)
  • Sensitivity: 25 dBµV, (S/N 60 dB at 5 kHz deviation, A-weighted)
  • Audio Output: Balanced: 27 mV (at 1 kHz, ±5 kHz deviation)
  • Output Connector: 3-pin mini XLR (TA3M-type)
  • Monitor Headphone Output: (typical) 35 mW max., 32 ohm load (per channel)
  • Monitor Headphone Jack: 3.5 mm TRS, signals on both Tip and Ring
  • External Power Requirements: 12V DC nominal, 500 mA
  • Batteries ATW-R1820:
    • Six 1.5V AA alkaline (not included)
    • ATW-R1810: Four 1.5V AA alkaline (not included)
  • Current Consumption:
    • Dual-channel Operation: 600 mA typical
    • Single-channel Operation: 350 mA typical
  • Battery Life:
    • Dual-channel Operation (ATW-R1820): 6 hours typical
    • Single-channel Operation (ATW-R1810): 10 hours typical depending on battery type and use pattern
  • Dimensions:
    • ATW-R1820: 85.0 mm (3.35") W x 133.0 mm (5.24") H x 36.0 mm (1.42") D
    • ATW-R1810: 75.0 mm (2.95") W x 125.0 mm (4.92") H x 32.0 mm (1.25") D
  • Net Weight:
    • ATW-R1820: 425 grams (15.0 oz) (without batteries)
    • ATW-R1810: 300 grams (10.5 oz) (without batteries)
  • Accessories Included:
    • ATW-R1820: Two flexible UHF antennas; two 18" TA3F to XLRM output cables; belt pouch
    • ATW-R1810: Two flexible UHF antennas; 18" TA3F to XLRM output cable; belt pouch

Audio Technica ATW-1811D Lavalier Camera Mount Wireless System BodyPack Specifications

  • RF Power Output: High: 30 mW; Low: 10 mW, nominal
  • Spurious Emissions: Under federal regulations
  • Dynamic Range: >105 dB, A-weighted
  • Input Connections: High impedance, low impedance, bias
  • Batteries: Two 1.5V AA alkaline (not included)
  • Current Consumption: High: 180 mA; Low: 160 mA, typical
  • Battery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern
  • Dimensions:
    • 66.0 mm (2.60") W x
    • 87.0 mm (3.43") H x
    • 24.0 mm (0.94") D
  • Net Weight: 80 grams (2.8 oz) (without batteries)

Audio Technica ATW-1811D Lavalier Camera Mount Wireless System Transmitter Specifications

  • RF Power Output: High: 30 mW; Low: 10 mW, nominal
  • Spurious Emissions: Under federal regulations
  • Input Connector: 3-pin locking XLRF-type
  • Batteries: Two 1.5V AA alkaline (not included)
  • Current Consumption: High: 180 mA; Low: 160 mA, typical
  • Battery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern
  • Dimensions:
    • 40.0 mm (1.57")
    • 111.0 mm (4.37")
    • 40.0 mm (1.57")
  • Net Weight: 199 grams (7.0 oz) (without batteries)

Audio Technica ATW-1811D Lavalier Camera Mount Wireless System Downloads


    Click here to view all Audio Technica products



    Share your knowledge of this product with other customers... Be the first to write a review

    Follow Us on Facebook