Audio Technica ATW-1311 Dual Digital Bodypack Wireless System

Audio Technica

(No reviews yet) Write a Review
Product Code: 9999-16857
$859.00
Adding to cart… The item has been added
We Need A Few Days

This item must be ordered in from the manufacturer. Give us a few days to get it here and heading your way. Go ahead and place your order and we will let you know as soon as it ships. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Got Questions? Need Support?

888-228-4530 Contact Us!

The Audio Technica ATW-1311 Dual Digital Bodypack Wireless System System works in 24-bit / 48 kHz, and allows easy use while ensuring clear and natural sound quality. This rack-mountable digital wireless system is so simple to use, so dependable and so automatic that you'll never have to think about it. Set it up anywhere, turn it on and its good to go.

The Audio Technica ATW-1311 Dual Digital Bodypack Wireless System contains an ATW-RC13 Rack-mount receiver chassis, ATW-RU13x2 receiver unit and two ATW-T1001 body-pack transmitters to complete the package. Select a microphone or cable with a cW-style locking 4-pin connector to complete the system. The Audio Technica ATW-1311 Wireless System provides the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original System 10 wireless system but with expanded features and versatility. The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.

Like all the products in the System 10 wireless family, the PRO Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit to maximize signal integrity.

Audio Technica ATW-1311 Dual Digital Bodypack Wireless System Features

  • Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
  • Operates in the 2.4 GHz range – completely free from TV interference
  • Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
  • Up to five chassis (ten receiver units) can be linked and used simultaneously
  • Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
  • Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
  • Automatic frequency selection for seamless, interference-free operation
  • Extremely easy operation with instantaneous channel selection, sync, and setup
  • Three levels of diversity assurance: frequency, time & space
  • Ground-lift switch helps eliminate audible hum caused by ground loops

Audio Technica ATW-1311 Dual Digital Bodypack Wireless System Specifications

  • Overall System Specs:
    • Operating Frequencies: 2.4 GHz ISM band (2400 to 2483.5 MHz)
    • Dynamic Range: >109 dB (A-Weighted), Typical
    • Total Harmonic Distortion: <0.05% typical
    • Operating Range: 60 m (200') Open Range Env. with No Interfering Signals
    • Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery Performance May Be Reduced at Very Low Temperatures
    • Frequency Response: 20 Hz to 20 kHz Depending on Microphone Type
    • Maximum Simultaneous Use (Recommended): 200' Minimum
  • Receiver Specs:
    • Receiving System: Diversity (Frequency/Time/Space)
    • Output Connectors: Remote Receiver Connector: RJ45; Link Connector: RJ12
    • Maximum Output Level: XLR, Balanced: 0 dBV 1/4" (6.3 mm), Unbalanced: +6 dBV
    • Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A Power Supply Switched Mode External
    • perating Temperature Range: 40° F (4° C) to 110° F (43° C)
    • Dimensions: 209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D
    • Net Weight: 940 grams (33.2 oz)
    • Accessory Included: Power Supply
    • Accessories Included: AC Adapter, Link cable, Rack-Mount Adapters, Joining Plate, Rubber Feet
  • Body-Pack Transmitter Specs:
    • RF Power Output: 10 mW
    • Spurious Emissions: Following Federal and National Regulations
    • Input Connections: Four-pin Locking Connector
    • Pin 1: GND, Pin 2: INST INPUT Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
    • Batteries: Two 1.5V AA (Not Included)
    • Battery Life: >7 hours (alkaline) Depending on Battery Type and Use Pattern
    • Dimensions: 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
    • Net Weight: 100 grams (3.5 oz) Without Batteries

Audio Technica ATW-1311 Dual Digital Bodypack Wireless System Includes

  • 1 x Audio Technica ATW-RU13x2 Receiver Unit
  • 2 x Audio Technica ATW-T1001 Body-Pack Transmitters
  • 1 x Audio Technica ATW-RC13 Rack-Mount Receiver Chassis
  • 2 Year Warranty

No review yet, Be first to Write a Review