Features

• Maximum intelligibility and clean, accurate reproduction for lecturers, stage and television talent, and houses of worship
• Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility
• Operates on battery or phantom power
• Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, interchangeable single and double mic holders
• Accessories available separately
• 9.8' (3.0 m) cable permanently attached to mic, TA3F connector at power module
• Also available as:
  AT898c – less power module; 55" (1.4 m) cable, unterminated
  AT898cL4 – less power module; 55" (1.4 m) cable terminated with Lemo connector for Sennheiser SK wireless systems
  AT898cT4 – less power module; 55" (1.4 m) cable terminated with TA4F connector for Shure wireless systems
  AT898cT5 – less power module; 55" (1.4 m) cable terminated with TA5F connector for ATW-U101 body-pack wireless system
  AT898cW – less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak™ wireless systems

• ELEMENT: Fixed-charge back plate, permanently polarized condenser
• POLAR PATTERN: Cardioid
• FREQUENCY RESPONSE: 200-15,000 Hz
• LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
• OPEN CIRCUIT SENSITIVITY: Phantom: -43 dB (7.0 mV) re 1V at 1 Pa
  Battery: -46 dB (5.0 mV) re 1V at 1 Pa
• IMPEDANCE: Phantom: 200 ohms
  Battery: 250 ohms
• MAXIMUM INPUT SOUND LEVEL: Phantom: 131 dB SPL, 1 kHz at 1% T.H.D.
  Battery: 115 dB SPL, 1 kHz at 1% T.H.D.
• DYNAMIC RANGE (typical): Phantom: 100 dB, 1 kHz at Max SPL
  Battery: 84 dB, 1 kHz at Max SPL
• SIGNAL-TO-NOISE RATIO: 63 dB, 1 kHz at 1 Pa
• PHANTOM POWER REQUIREMENTS: 11-52V DC, 2 mA typical
• BATTERY TYPE: 1.5V AA/UM3
• BATTERY CURRENT / LIFE: 0.4 mA / 1200 hours typical (alkaline)
• SWITCH: Flat, roll-off (recessed)
• WEIGHT (MICROPHONE): 0.03 oz (0.9 g)
• WEIGHT (POWER MODULE): 3.6 oz (102 g)
• DIMENSIONS (MICROPHONE): 0.91" (23.0 mm) long, 0.21" (5.3 mm) diameter
• DIMENSIONS (POWER MODULE): 5.71" (145.0 mm) long, 0.83" (21.0 mm) diameter
• OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type
• CABLE: 9.8' (3.0 m) long (permanently attached to microphone), 0.08" (2.0 mm) diameter, 2-conductor, shielded cable with TA3F output connector that mates with TB3M jack on power module
• ACCESSORIES FURNISHED: AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two windscreens; battery; protective carrying case
• AUDIO-TECHNICA CASE STYLE: M30

Click Here to view all Audio Technica products.