Audio Technica AT4053b Hypercardioid Microphone

Audio Technica

(No reviews yet) Write a Review
Product Code: 9999-05344
$699.00
Adding to cart… The item has been added
We Need A Few Days

This item must be ordered in from the manufacturer. Give us a few days to get it here and heading your way. Go ahead and place your order and we will let you know as soon as it ships. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Got Questions? Need Support?

888-228-4530 Contact Us!

The Audio Technica AT4053b Hypercardioid Microphone is a condenser microphone with a hypercardioid polar pattern. It is designed to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement.

The Audio Technica AT4053b Hypercardioid Microphone is a versatile studio performer designed to be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the Audio Technica AT4053b Hypercardioid Microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The Audio Technica AT4053b Hypercardioid Microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).

Audio Technica AT4053b Hypercardioid Microphone Features

  • Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
  • Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Direct-coupled, balanced output results in a clean signal even under high-output conditions
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • Switchable 80 Hz hi-pass filter and 10 dB pad
  • Rugged turned-brass microphone housing for enduring dependability
  • State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
  • RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)

Audio Technica AT4053b Hypercardioid Microphone Specifications

  • Element: Externally Polarized (DC Bias) Capacitor
  • Polar Pattern: Hypercardioid
  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 18 dB/Octave
  • Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
  • Impedance: 50 Ohms
  • Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB Pad (Nominal)
  • Noise: 16 dB SPL
  • Dynamic Range (Typical): 129 dB, 1 kHz at Max SPL
  • Signal-To-Noise Ratio: 78 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 48V DC, 4.8 mA Typical
  • Switch: Flat, Roll-Off; 10 dB Pad (Nominal)
  • Weight: 127 g (4.5 oz)
  • Dimensions: 155.0 mm (6.10") Long, 21.0 mm (0.83") Maximum Body Diameter
  • Output Connector: Integral 3-Pin XLRM-Type
  • Optional Interchangeable Elements: AT4049b-EL (Omnidirectional); AT4051b-EL (Cardioid)
  • Audio-Technica Case Style: S1

Audio Technica AT4053b Hypercardioid Microphone Includes

  • Audio Technica AT4053b Hypercardioid Microphone
  • Audio Technica AT8405a Stand Clamp for 5/8"-27 Threaded Stands
  • Windscreen
  • Protective Carrying Case
  • 5 Year Warranty

No review yet, Be first to Write a Review