The Audio Technica AE2500 Microphone is a dual-element cardioid instrument microphone featuring cardioid condenser and dynamic capsules combined in one housing. The dynamic element delivers the aggressive attack of the beater while the condenser captures the round tonalities of the shell.
The Audio Technica AE2500 Microphone is an ultimate kick-drum mic with two elements (condenser and dynamic) enclosed in a single housing. The dynamic element delivers the aggressive attack of the beater; the condenser captures the round tonalities of the shell. Two layers of resistive mesh form multiple densities over the dynamic element’s side-entry ports, exercising precise control over the time at which off-axis signals arrive at the diaphragm. The condenser diaphragm is optimally tensioned and aged for long-term consistency and stability.
Audio Technica AE2500 Microphone Features
- Revolutionary dual-element design represents a ground-breaking transducer achievement
- Two elements (condenser and dynamic) are enclosed in a single housing
- Dynamic element delivers the aggressive attack of the beater while the condenser captures the round tonalities of the shell
- Elements are positioned in a perfect phase relationship, something practically unachievable with two separate microphones
- Robust design for enduring dependability on the road
- Integral 80 Hz HPF switch and 10 dB pad on condenser element
- Included isolation clamp for shock protection, secure mounting and easy positioning
Audio Technica AE2500 Microphone Specifications
- Elements: Condenser, Dynamic
- Polar Pattern: Cardioid
- Frequency Response: 20-17,000 Hz (Condenser), 30-10,000 Hz (Dynamic)
- Low Frequency Roll-Off: 80 Hz, 12 dB/Octave (Condenser)
- Open Circuit Sensitivity: -51 dB (2.8 mV) re 1V at 1 Pa (Condenser), -54 dB (1.9 mV) re 1V at 1 Pa (Dynamic)
- Impedance: 100 Ohms (Condenser), 600 Ohms (Dynamic)
- Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% THD (Condenser); 158 dB SPL, with 10 dB Pad (Nominal)
- Dynamic Range (Typical): 124 dB, 1 kHz at Max SPL (Condenser)
- Signal-To-Noise Ratio: 70 dB, 1 kHz at 1 Pa (Condenser)
- Phantom Power Requirements: 11-52V DC, 3 mA Typical (Condenser)
- Switches: (Condenser Only) High-Pass Filter; 10 dB Pad (Nominal)
- Weight: 13.8 oz (390 g)
- Dimensions: 6.50" (165.0 mm) Long, 2.17" (55.0 mm) Maximum Diameter
- Output Connector: Integral 5-Pin XLRM-Type
- Cable: 16.5' (5 m) Dual Shielded, 8-Conductor Cable, 5-Pin XLRF-Type Connector at Microphone, Two 3-Pin XLRM-Type Output Connectors
- Audio-Technica Case Style: R8
Audio Technica AE2500 Microphone Includes
- Audio Technica AE2500 Microphone
- Audio Technica AT8471 Isolation Clamp for 5/8"-27 Threaded Stands
- 5/8"-27 to 3/8"-16 Threaded Adapter
- Soft Protective Pouch
- 5 Year Warranty
No review yet, Be first to Write a Review
Write a Review
Sign Up for exclusive sales and offers!