Home > Recording > Audio Interfaces > USB Audio Interfaces >

Aphex IN 2 USB Audio Interface

Aphex IN 2
Aphex IN 2
List Price: $529.00
Our Price: $359.00

Availability: Usually Ships in 3 to 5 Days
Product Code: 9999-14020


Aphex IN 2 USB Audio Interface

Aphex IN 2 USB Audio Interface

Aphex IN 2 USB Audio Interface Details

The Aphex IN2 was conceived with the Project Studio in mind. It was designed to be a USB audio interface that provides integrated solutions. The Class A mic preamps provide plenty of clean gain for any microphone type and the optical compressors keep your dynamic range under control. The headphone amp is very loud and very clear and inspires better performances. There are no menus to scroll through. IN2 was designed with ease of use in mind, so all dedicated function buttons are located right on the front panel. No breakout cables are used. All of the inputs and outputs are built right in to the device. In fact, with all of this built-in processing power, there's no need to buy or carry expensive (and extensive) outboard gear.

Using a 12V external power supply, rather than 5V USB bus power allows us to use these high performance Aphex technologies.

The S/PDIF input allows you to expand your inputs by connecting an outboard preamp or other digital sound source. Meanwhile, the S/PDIF output can be used to connect to an Aphex HeadPod4 should more headphone outputs be required.

MIDI I/O is also included for connecting legacy keyboard controllers, MIDI Time Code (MTC) or MIDI Clock.

Aphex IN 2 USB Audio Interface Features

  • 2 Aphex Class A microphone preamps
  • Aphex optical compressors built-in
  • High-output headphone amp built-in
  • 24-bit/192kHz A/D & D/A

Aphex IN 2 USB Audio Interface Specifications

  • Minimum Computer System Requirements:
    • Mac OSX 10.5 and higher
    • Windows XP SP3 (32-bit)
    • Windows Vista SP2, Windows 7 SP1 (32/64-bit), Windows 8/8.1
  • Analog Inputs
    • Microphone Inputs: XLR-3F
    • Type: Transformerless, Instrumentation first stage, Class-A second stage
    • Input Impedance: 2k ohms nominal
    • Maximum Input Level (MIL): ""2dBu (+18dBu with pad)
    • CMRR: >80 dB @ 60 Hz
    • Instrument Connectors: 1/4" TS
    • Instrument Input
    • Impedance: 10Mohm nominal
    • Preamp Gain Range: 38dB without pad
    • Phantom Power: +48VDC
    • Pad: 20dB
    • Compressor: Fixed parameters, Aphex custom optical element
    • Low Cut Filter: 75Hz nominal cutoff, 2nd order
  • Main Outputs
    • Connector: 1/4" TRS phone jacks
    • Type: True Balanced (may be used unbalanced)
    • Output Impedance: 100 ohms
    • SNR (typical): 109dB, unweighted
    • THD+N (typical): 0.002%
    • Nominal Level: +4dBu
    • Maximum Output Level: >+21dBu before clipping
  • Headphone Output
    • Output Impedance: 10 ohms
    • Output Power: >800mW into 25 ohms
  • Digital Audio
    • Sample Rates: 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4kHz, 192kHz
    • Resolution: 24 bit
  • Other Specifications
    • Power requirements: 12VDC, center positive, 1000mA minimum

Click here to view all Aphex products

You may also need...
Sennheiser HD280 Pro Closed Headphones MoreMe Headphone Extension Cable (25 Foot) Direct Sound EX-29 Extreme Isolation Headphones Direct Sound EX-29 Extreme Isolation Headphones (White)
Our Price: $99.95

Our Price: $9.99

Our Price: $129.95

Our Price: $139.95

Sennheiser HD280 Pro MoreMe Headphone Extension Cable Direct Sound EX-29 Direct Sound EX-29
Shure SRH840 Headphones Audio Technica ATH-M50x Closed-Back Dynamic Monitor Headphones Mogami Headphone Extension Cable
Our Price: $199.00

Our Price: $149.00

Starting At: $64.95

Shure SRH840 Audio Technica ATH-M50x Mogami Headphone Extension Cable