Home > Microphones > Mic Accessories > Phantom Power Supplies >

  APEX APP2 Phantom Power Supply

APEX APP2
APEX APP2
 
List Price: $51.99
Our Price: $39.00


Availability: Usually Ships in 24 Hours
Product Code: 7513

 

APEX APP2 Phantom Power Supply

The APEX APP2 is a single phantom power supply that delivers 48V power to condenser microphones.

APEX APP2 Single 48V Phantom Power Supply Details
The APEX APP2 is a single phantom power supply that delivers 48V power to condenser microphones. Different condenser microphones specify different amounts of required phantom power. As a rule these ratings can range from 48 volts all the way down to 9 volts. Fortunately there is some flexibility in terms of matching phantom voltage to your mic. A rough rule of thumb would be "more is better". For example, a 24-volt condenser mic will run perfectly on 48 volts. In fact mics rated at as little as 9 volts can often operate on 48 volts, but you might want to check with the manufacturer first. Conversely, a mic will generally perform best driven by not less than its rated voltage so, for a 48V mic, you would obtain best results with 48 volts of phantom power.

APEX APP2 Single 48V Phantom Power Supply Features
  • Phantom power = 48VDC +/- 2VDC
  • Input Connector = XLR female
  • Output connector = XLR male
  • Output Noise = -71 dBV
  • Frequency Response = 10Hz - 25kHz
  • Power = adaptor included
  • Current Drain - 14mA
  • Size - 5.25" x 2.75" x 1.75" (130mm x 74mm x 45mm)
  • Weight - 1lb (450g)