| AKG C214 Large Diaphragm Cardioid Condenser Microphone Details
The new AKG C 214 is designed as a cost-effective alternative to the high-end, industry-leading C 414 family. It captures sound combining one side of the legendary C 414 dual-capsule system and AKG’s patented Back-Plate Technology which results in an outstanding performance close to the famous C 414 B-XLS.
AKG's industry-leading C 414 microphones are already a permanent fixture in the world's biggest recording studios and a highly respected work horse for independent artists, broadcasting, and on-stage miking as well.
Like the C 414 models, the C 214 is capable of handling the rigors of high-pressure sound such as amplified guitars, with a sensitivity perfect for voice and orchestral instruments as well. Additionally, the microphone offers a 20 dB Attenuation pad, 13 dB noise floor, and a low cut switch—all in an elegant but rugged package. Besides, the C 214 will also work on low phantom power voltages from 12 up to 48 volts.
Additional features include an integrated suspension, a double mesh grill high RF immunity without affecting acoustics. The circuitry in the C 214 provides maximum SPL capability with minimum noise and the gold-plated XLR-type output connector offers loss-free signals.
The C 214 comes complete with carrying case, windscreen, and spider suspension mount included.
AKG C214 Large Diaphragm Cardioid Condenser Microphone Features
-
AKG’s Legendary 1” Edge-Terminated Large Diaphragm Sound
-
Outstanding Dynamic Range (up to 156 dB SPL, Ultra-Low Noise)
-
Roadworthy Design
-
Integrated Suspension to reduce mechanical Noise
-
Switchable 20 dB Attenuation Pad and Low Cut Switch
-
Rugged double mesh Grill for high RF immunity but unaffected Acoustics
-
All-metal Die-cast body with shock- and scratch-resistant Finish
-
Spider-type Shock Mount included
-
Metal Carrying Case included
-
Designed, Engineered and Built in Vienna, Austria
AKG C214 Large Diaphragm Cardioid Condenser Microphone Specifications
-
Polar pattern: Cardioid
-
Frequency range: 20 to 20,000 Hz
-
Sensitivity: 20 mV/Pa (-34 dBV)
-
Max. SPL: 136/156 dB SPL (0/-20 dB) (for 0.5% THD)
-
Equivalent noise level: 13 dB-A to IEC 60268-4 (A-weighted)
-
Signal/noise ratio (A-weighted): 81 dB
-
Preattenuation pad: 0/-20 dB (switchable)
-
Bass cut filter slope: 160 Hz, 6 dB/Octave, switchable
-
Impedance: <=200 ohms
-
Recommended load impedance: >=1000 ohms
-
Supply voltage: 12 to 52 V Phantom power to IEC 61938
-
Powering: < 2 mA
-
Dynamic range: 123/143 dB (0/-20 dB) (A-weighted)
-
Connector: IEC standard 3-pin XLR
-
Finish: matte grayish blue
-
Dimensions: 160 x 55 mm (6.3 x 2.2 in.)
-
Net weight: 280 g (0.62 lbs.)
-
Shipping weight: 1450 g (3.22 lbs.)
-
Patent(s): Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488) |
