Connectors and controls
All subwoofers up to the Sub2100 feature both balanced (XLR) and unbalanced (RCA) in and output connectors, and numerous controls to adapt the subwoofer to different room acoustics and specific requirements: All units have a level control that varies from -60dB to +6dB, a phase ±180° switch and variable upper frequency barrier control (50-150 Hz), a switchable 85Hz high pass filter for the satellite output. In addition, there is a ‘signal-on/continuous’ switch. This provides the option of automatic power up whenever the subwoofer receives a signal and automatic power off after 15 minutes of no signal.

Sub12
The Sub12 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring.
A large (50 mm) voice coil is driven by a 200 W Ice Power amp. This amp stays cool as it uses PWM  technology in the amp and the power supply sections, producing >90% overall efficiency, and can handle its maximum power without danger to the electronics or the driver. The Sub12 has a 12” woofer capable of producing a 118 dB SPL max output and reproduces frequencies down to 22 Hz.

The subwoofer works with a new down-firing bass reflex tube that, due to its shape and size, avoids unnecessary ventilation noise. For larger rooms or higher levels it is possible to chain as many ADAM Subs together as necessary.

The Sub12 is an ideal match for ADAM monitors such as the P-series or the SX-Series. In any small to medium sized control room, they guarantee powerful yet precise bass response.